vs.

      Case TR320 vs. Takeuchi TL120

      12 reasons to buy Case TR320:

      Sizes

      Clearance 243 mm and 20.7 mm 91 % more or 222.3 mm

      Operation

      Generator current strength 95 amperes and 40 amperes 58 % more or 55 amperes
      Maximum speed at low range 9.3 km/h and 6.4 km/h 31 % more or 2.9 km/h
      Maximum speed at high range 13.4 km/h and 9.3 km/h 31 % more or 4.1 km/h
      Fuel Capacity 96.5 l. and 57.9 l. 40 % more or 38.6 l.
      Engine oil volume 9.5 l. and 7.4 l. 22 % more or 2.1 l.
      Hydraulic system fluid volume 44.5 l. and 29.2 l. 34 % more or 15.3 l.

      Motor

      Peak torque 340.3 Nm and 166.8 Nm 51 % more or 173.5 Nm
      Full power 67.1 kW and 38.8 kW 42 % more or 28.3 kW
      Displacement 3.2 l. and 2 l. 37 % more or 1.2 l.

      Hydraulic system

      Pump flow rate 46 l/min and 57.2 l/min 20 % less or 11.2 l/min

      Carrier

      Caterpillar track width 400 mm and 296.4 mm 26 % more or 103.6 mm

      8 reasons to buy Takeuchi TL120:

      Sizes

      Ground clearance at maximum lifting and unloading 2905.7 mm and 2600 mm 11 % more or 305.7 mm
      Machine rear swing radius from center 1501.1 mm and 1788.2 mm 16 % less or 287.1 mm
      Radius at maximum lifting and unloading 586.7 mm and 540 mm 8 % more or 46.7 mm
      Turning radius with bucket from center 2057.4 mm and 2171.7 mm 5 % less or 114.3 mm

      Motor

      Power measured at 2800 rev / min and 2500 rev / min 11 % more or 300 rev
      Torque measured at 1680 rev / min and 1400 rev / min 17 % more or 280 rev

      Load-transfer device

      Tipping load 1609.8 kg and 2903 kg 45 % less or 1293.2 kg

      Carrier

      Specific ground pressure 31.7 kPa and 33.1 kPa 4 % less or 1.4 kPa

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1900 mm and 1470.7 mm
      Length with bucket 3600 mm and 3220.7 mm
      Height to cab upper part 2000 mm and 1971.1 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 4354.5 kg and 2699.8 kg

      Motor

      Manufacturer Case and Yanmar
      Model 432T/M3 and 4TNV84T
      Cylinders number 4 and 4

      Load-transfer device

      Workload 1451.5 kg and 565.2 kg

      Hydraulic system

      Overflow valve pressure 20684.3 kPa and 20684.3 kPa

      Images

      Sizes

      1. Length with bucket 3600 mm 1. Length with bucket 3220.7 mm
      2. Width between caterpillar tracks 1900 mm 2. Width between caterpillar tracks 1470.7 mm
      3. Height to cab upper part 2000 mm 3. Height to cab upper part 1971.1 mm
      5. Clearance 243 mm 5. Clearance 20.7 mm
      7. Ground clearance at maximum lifting and unloading 2600 mm 7. Ground clearance at maximum lifting and unloading 2905.7 mm
      8. Radius at maximum lifting and unloading 540 mm 8. Radius at maximum lifting and unloading 586.7 mm