vs.

      Case TR320 vs. Takeuchi TL150

      7 reasons to buy Case TR320:

      Sizes

      Turning radius with bucket from center 2171.7 mm and 2433.3 mm 11 % less or 261.6 mm

      Operation

      Maximum speed at high range 13.4 km/h and 11.1 km/h 17 % more or 2.3 km/h
      Generator current strength 95 amperes and 60 amperes 37 % more or 35 amperes
      Maximum speed at low range 9.3 km/h and 7.7 km/h 17 % more or 1.6 km/h

      Motor

      Power measured at 2500 rev / min and 2200 rev / min 12 % more or 300 rev

      Load-transfer device

      Tipping load 2903 kg and 3200.5 kg 9 % less or 297.5 kg

      Hydraulic system

      Pump flow rate 46 l/min and 88.6 l/min 48 % less or 42.6 l/min

      12 reasons to buy Takeuchi TL150:

      Sizes

      Machine rear swing radius from center 1745 mm and 1788.2 mm 2 % less or 43.2 mm
      Clearance 335.3 mm and 243 mm 28 % more or 92.3 mm
      Ground clearance at maximum lifting and unloading 3202.9 mm and 2600 mm 19 % more or 602.9 mm
      Radius at maximum lifting and unloading 985.5 mm and 540 mm 45 % more or 445.5 mm

      Operation

      Fuel Capacity 107.9 l. and 96.5 l. 11 % more or 11.4 l.
      Engine oil volume 14 l. and 9.5 l. 32 % more or 4.5 l.
      Hydraulic system fluid volume 64 l. and 44.5 l. 30 % more or 19.5 l.

      Motor

      Full power 72.3 kW and 67.1 kW 7 % more or 5.2 kW
      Displacement 4.4 l. and 3.2 l. 27 % more or 1.2 l.
      Peak torque 394.5 Nm and 340.3 Nm 14 % more or 54.2 Nm

      Carrier

      Specific ground pressure 29.6 kPa and 33.1 kPa 11 % less or 3.5 kPa
      Caterpillar track width 457.2 mm and 400 mm 13 % more or 57.2 mm

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1900 mm and 1859.3 mm
      Length with bucket 3600 mm and 3931.9 mm
      Height to cab upper part 2000 mm and 2319 mm

      Operation

      Working weight 4354.5 kg and 4945.1 kg
      Operating voltage 12 V and 12 V

      Motor

      Torque measured at 1400 rev / min and 1400 rev / min
      Cylinders number 4 and 4
      Manufacturer Case and Yanmar
      Model 432T/M3 and 4TNV106T

      Load-transfer device

      Workload 1451.5 kg and 1120.4 kg

      Hydraulic system

      Overflow valve pressure 20684.3 kPa and 20587.7 kPa

      Images

      Sizes

      1. Length with bucket 3600 mm 1. Length with bucket 3931.9 mm
      2. Width between caterpillar tracks 1900 mm 2. Width between caterpillar tracks 1859.3 mm
      3. Height to cab upper part 2000 mm 3. Height to cab upper part 2319 mm
      5. Clearance 243 mm 5. Clearance 335.3 mm
      7. Ground clearance at maximum lifting and unloading 2600 mm 7. Ground clearance at maximum lifting and unloading 3202.9 mm
      8. Radius at maximum lifting and unloading 540 mm 8. Radius at maximum lifting and unloading 985.5 mm