vs.

      Gehl CTL65 vs. Case 440CT serie 3

      11 reasons to buy Gehl CTL65:

      Sizes

      Clearance 310 mm and 236 mm 24 % more or 74 mm
      Radius at maximum lifting and unloading 730 mm and 620 mm 15 % more or 110 mm

      Operation

      Cooling system fluid volume 16.5 l. and 11.4 l. 31 % more or 5.1 l.
      Hydraulic system fluid volume 38.6 l. and 26.9 l. 30 % more or 11.7 l.

      Motor

      Torque measured at 1600 rev / min and 1300 rev / min 19 % more or 300 rev
      Power measured at 2500 rev / min and 2300 rev / min 8 % more or 200 rev

      Load-transfer device

      Tipping load 2100 kg and 2721.6 kg 23 % less or 621.6 kg

      Hydraulic system

      Pump flow rate 69.5 l/min and 83 l/min 16 % less or 13.5 l/min

      Carrier

      Caterpillar track width 8128 mm and 400 mm 95 % more or 7728 mm
      Specific ground pressure 33.5 kPa and 34.5 kPa 3 % less or 1.0 kPa
      Rolling bearings number on either side 4 and 3 25 % more or 1

      11 reasons to buy Case 440CT serie 3:

      Sizes

      Ground clearance at maximum lifting and unloading 2430 mm and 2370 mm 2 % more or 60 mm
      Machine rear swing radius from center 1450 mm and 1549 mm 6 % less or 99 mm
      Turning radius with bucket from center 2020 mm and 2362 mm 14 % less or 342 mm

      Operation

      Fuel Capacity 88.2 l. and 75 l. 15 % more or 13.2 l.
      Engine oil volume 12 l. and 10.2 l. 15 % more or 1.8 l.
      Generator current strength 95 amperes and 40 amperes 58 % more or 55 amperes
      Maximum speed at low range 8.2 km/h and 7.2 km/h 12 % more or 1.0 km/h
      Maximum speed at high range 12.9 km/h and 10.9 km/h 16 % more or 2.0 km/h

      Motor

      Displacement 4.5 l. and 3.3 l. 27 % more or 1.2 l.
      Full power 67.1 kW and 50 kW 25 % more or 17.1 kW
      Peak torque 390.5 Nm and 242.7 Nm 38 % more or 147.8 Nm

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1580 mm and 1812 mm
      Length with bucket 3543 mm and 3290 mm
      Length without bucket 2756 mm and 2600 mm
      Height to cab upper part 2123 mm and 2050 mm

      Operation

      Working weight 3635 kg and 4048.3 kg
      Operating voltage 12 V and 12 V

      Motor

      Manufacturer Yanmar and Case
      Cylinders number 4 and 4
      Model 4TNV98 and 445T/M3
      Aspiration natural aspiration and turbocharging

      Load-transfer device

      Workload 1050 kg and 1360.8 kg

      Carrier

      Caterpillar track length on ground level 423367.2 mm and 1438 mm

      Images

      Sizes

      6. Length without bucket 2756 mm 6. Length without bucket 2600 mm
      7. Ground clearance at maximum lifting and unloading 2370 mm 7. Ground clearance at maximum lifting and unloading 2430 mm
      8. Radius at maximum lifting and unloading 730 mm 8. Radius at maximum lifting and unloading 620 mm
      1. Length with bucket 3543 mm 1. Length with bucket 3290 mm
      2. Width between caterpillar tracks 1580 mm 2. Width between caterpillar tracks 1812 mm
      3. Height to cab upper part 2123 mm 3. Height to cab upper part 2050 mm
      5. Clearance 310 mm 5. Clearance 236 mm

      Carrier

      4. Caterpillar track length on ground level 423367.2 mm 4. Caterpillar track length on ground level 1438 mm