vs.

      Gehl CTL85 vs. Mustang MTL16

      16 reasons to buy Gehl CTL85:

      Sizes

      Clearance 345 mm and 310 mm 10 % more or 35 mm
      Ground clearance at maximum lifting and unloading 2430 mm and 2370 mm 2 % more or 60 mm
      Radius at maximum lifting and unloading 1049 mm and 851 mm 19 % more or 198 mm

      Operation

      Cooling system fluid volume 16.5 l. and 11 l. 33 % more or 5.5 l.
      Engine oil volume 13.2 l. and 10.2 l. 23 % more or 3.0 l.
      Hydraulic system fluid volume 60.1 l. and 59.8 l. 0 % more or 0.3 l.
      Generator current strength 80 amperes and 40 amperes 50 % more or 40 amperes
      Maximum speed at low range 7.7 km/h and 7.2 km/h 6 % more or 0.5 km/h
      Maximum speed at high range 12.1 km/h and 10.1 km/h 17 % more or 2.0 km/h
      Fuel Capacity 108 l. and 75 l. 31 % more or 33 l.

      Motor

      Full power 68.6 kW and 49 kW 29 % more or 19.6 kW
      Peak torque 325.4 Nm and 244 Nm 25 % more or 81.4 Nm
      Displacement 3.8 l. and 3.3 l. 13 % more or 0.5 l.

      Carrier

      Specific ground pressure 31 kPa and 33.5 kPa 7 % less or 2.5 kPa
      Rolling bearings number on either side 5 and 4 20 % more or 1
      Caterpillar track width 457 mm and 320 mm 30 % more or 137 mm

      5 reasons to buy Mustang MTL16:

      Sizes

      Machine rear swing radius from center 1549 mm and 1816 mm 15 % less or 267 mm
      Turning radius with bucket from center 2362 mm and 2692 mm 12 % less or 330 mm

      Motor

      Power measured at 2400 rev / min and 2200 rev / min 8 % more or 200 rev

      Load-transfer device

      Tipping load 2100 kg and 3200 kg 34 % less or 1100 kg

      Hydraulic system

      Pump flow rate 68 l/min and 88.6 l/min 23 % less or 20.6 l/min

      Neutral reasons:

      Sizes

      Length with bucket 3985 mm and 3543 mm
      Length without bucket 3135 mm and 2756 mm
      Height to cab upper part 2217 mm and 2123 mm
      Width between caterpillar tracks 1884 mm and 1580 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 5090 kg and 3401 kg

      Motor

      Manufacturer Kubota and Yanmar
      Model V3800DI-T and 4TNV98
      Torque measured at 1600 rev / min and 1600 rev / min
      Cylinders number 4 and 4
      Aspiration turbocharging and natural aspiration

      Load-transfer device

      Workload 1600 kg and 1050 kg

      Hydraulic system

      Overflow valve pressure 20601.5 kPa and 20600 kPa

      Carrier

      Caterpillar track length on ground level 1598 mm and 1389 mm

      Images

      Sizes

      1. Length with bucket 3985 mm 1. Length with bucket 3543 mm
      2. Width between caterpillar tracks 1884 mm 2. Width between caterpillar tracks 1580 mm
      3. Height to cab upper part 2217 mm 3. Height to cab upper part 2123 mm
      5. Clearance 345 mm 5. Clearance 310 mm
      6. Length without bucket 3135 mm 6. Length without bucket 2756 mm
      7. Ground clearance at maximum lifting and unloading 2430 mm 7. Ground clearance at maximum lifting and unloading 2370 mm
      8. Radius at maximum lifting and unloading 1049 mm 8. Radius at maximum lifting and unloading 851 mm

      Carrier

      4. Caterpillar track length on ground level 1598 mm 4. Caterpillar track length on ground level 1389 mm