- Home/
- Comparison/
- Rough Terrain Truck/
- Gehl CTL85 vs. Mustang MTL20
Gehl CTL85 vs. Mustang MTL20
13 reasons to buy Gehl CTL85:
Sizes
Ground clearance at maximum lifting and unloading | 2430 mm and 2408 mm | 1 % more or 22 mm |
Radius at maximum lifting and unloading | 1049 mm and 874 mm | 17 % more or 175 mm |
Clearance | 345 mm and 325 mm | 6 % more or 20 mm |
Operation
Cooling system fluid volume | 16.5 l. and 15.1 l. | 8 % more or 1.4 l. |
Maximum speed at low range | 7.7 km/h and 7.2 km/h | 6 % more or 0.5 km/h |
Engine oil volume | 13.2 l. and 9.4 l. | 29 % more or 3.8 l. |
Maximum speed at high range | 12.1 km/h and 10.3 km/h | 15 % more or 1.8 km/h |
Generator current strength | 80 amperes and 50 amperes | 37 % more or 30 amperes |
Fuel Capacity | 108 l. and 90 l. | 17 % more or 18 l. |
Motor
Full power | 68.6 kW and 60 kW | 13 % more or 8.6 kW |
Peak torque | 325.4 Nm and 258 Nm | 21 % more or 67.4 Nm |
Displacement | 3.8 l. and 3.1 l. | 18 % more or 0.7 l. |
Carrier
Rolling bearings number on either side | 5 and 4 | 20 % more or 1 |
8 reasons to buy Mustang MTL20:
Sizes
Machine rear swing radius from center | 1666 mm and 1816 mm | 8 % less or 150 mm |
Turning radius with bucket from center | 2294 mm and 2692 mm | 15 % less or 398 mm |
Operation
Hydraulic system fluid volume | 83 l. and 60.1 l. | 28 % more or 22.9 l. |
Motor
Power measured at | 2400 rev / min and 2200 rev / min | 8 % more or 200 rev |
Torque measured at | 1800 rev / min and 1600 rev / min | 11 % more or 200 rev |
Load-transfer device
Tipping load | 2700 kg and 3200 kg | 16 % less or 500 kg |
Hydraulic system
Pump flow rate | 75 l/min and 88.6 l/min | 15 % less or 13.6 l/min |
Carrier
Specific ground pressure | 28.3 kPa and 31 kPa | 9 % less or 2.7 kPa |
Neutral reasons:
Sizes
Width between caterpillar tracks | 1884 mm and 1770 mm |
Length with bucket | 3985 mm and 3708 mm |
Length without bucket | 3135 mm and 2949 mm |
Height to cab upper part | 2217 mm and 2167 mm |
Operation
Operating voltage | 12 V and 12 V |
Working weight | 5090 kg and 4350 kg |
Motor
Manufacturer | Kubota and Isuzu |
Model | V3800DI-T and 4JG1T |
Cylinders number | 4 and 4 |
Aspiration | turbocharging and turbocharging |
Load-transfer device
Workload | 1600 kg and 1350 kg |
Hydraulic system
Overflow valve pressure | 20601.5 kPa and 20600 kPa |
Carrier
Caterpillar track length on ground level | 1598 mm and 1499 mm |
Caterpillar track width | 457 mm and 457 mm |
Images
Sizes
1. Length with bucket | 3985 mm | 1. Length with bucket | 3708 mm |
2. Width between caterpillar tracks | 1884 mm | 2. Width between caterpillar tracks | 1770 mm |
3. Height to cab upper part | 2217 mm | 3. Height to cab upper part | 2167 mm |
5. Clearance | 345 mm | 5. Clearance | 325 mm |
6. Length without bucket | 3135 mm | 6. Length without bucket | 2949 mm |
7. Ground clearance at maximum lifting and unloading | 2430 mm | 7. Ground clearance at maximum lifting and unloading | 2408 mm |
8. Radius at maximum lifting and unloading | 1049 mm | 8. Radius at maximum lifting and unloading | 874 mm |
Carrier
4. Caterpillar track length on ground level | 1598 mm | 4. Caterpillar track length on ground level | 1499 mm |