vs.

      Gehl RT210 vs. Case 440CT

      11 reasons to buy Gehl RT210:

      Sizes

      Clearance 330 mm and 229 mm 31 % more or 101 mm

      Operation

      Fuel Capacity 92 l. and 83.3 l. 9 % more or 8.7 l.
      Hydraulic system fluid volume 52.2 l. and 50 l. 4 % more or 2.2 l.
      Maximum speed at low range 8.7 km/h and 8.2 km/h 6 % more or 0.5 km/h
      Maximum speed at high range 12.7 km/h and 12.2 km/h 4 % more or 0.5 km/h

      Motor

      Power measured at 2500 rev / min and 2300 rev / min 8 % more or 200 rev
      Torque measured at 1600 rev / min and 1400 rev / min 12 % more or 200 rev

      Hydraulic system

      Pump flow rate 82.5 l/min and 83 l/min 1 % less or 0.5 l/min

      Carrier

      Caterpillar track width 450 mm and 400 mm 11 % more or 50 mm
      Specific ground pressure 32.4 kPa and 34.5 kPa 6 % less or 2.1 kPa
      Rolling bearings number on either side 4 and 3 25 % more or 1

      9 reasons to buy Case 440CT:

      Sizes

      Machine rear swing radius from center 1480 mm and 1641 mm 10 % less or 161 mm
      Turning radius with bucket from center 2040 mm and 2492 mm 18 % less or 452 mm
      Ground clearance at maximum lifting and unloading 2450 mm and 2431 mm 1 % more or 19 mm
      Radius at maximum lifting and unloading 590 mm and 340 mm 42 % more or 250 mm

      Operation

      Cooling system fluid volume 17 l. and 14.4 l. 15 % more or 2.6 l.

      Motor

      Displacement 4.5 l. and 3.3 l. 27 % more or 1.2 l.
      Effective power 61 kW and 52.7 kW 14 % more or 8.3 kW
      Peak torque 357 Nm and 279.3 Nm 22 % more or 77.7 Nm

      Load-transfer device

      Tipping load 2721 kg and 2721.6 kg 0 % less or 0.6 kg

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1765 mm and 1802 mm
      Length with bucket 3868 mm and 3230 mm
      Length without bucket 2908 mm and 2640 mm
      Height to cab upper part 2111 mm and 1950 mm

      Operation

      Working weight 4486 kg and 4043 kg
      Operating voltage 12 V and 12 V

      Motor

      Cylinders number 4 and 4
      Model 4TNV98-XNMS and Family III 445T/M2
      Manufacturer Yanmar and Case
      Aspiration turbocharging and turbocharging

      Load-transfer device

      Workload 952.5 kg and 1361 kg

      Carrier

      Track width 1313 mm and 1400 mm
      Caterpillar track length on ground level 1483 mm and 1436 mm

      Images

      Sizes

      7. Ground clearance at maximum lifting and unloading 2431 mm 7. Ground clearance at maximum lifting and unloading 2450 mm
      8. Radius at maximum lifting and unloading 340 mm 8. Radius at maximum lifting and unloading 590 mm
      1. Length with bucket 3868 mm 1. Length with bucket 3230 mm
      2. Width between caterpillar tracks 1765 mm 2. Width between caterpillar tracks 1802 mm
      3. Height to cab upper part 2111 mm 3. Height to cab upper part 1950 mm
      5. Clearance 330 mm 5. Clearance 229 mm
      6. Length without bucket 2908 mm 6. Length without bucket 2640 mm

      Carrier

      4. Caterpillar track length on ground level 1483 mm 4. Caterpillar track length on ground level 1436 mm
      9. Track width 1313 mm 9. Track width 1400 mm