vs.

      Mustang MTL16 vs. Case 445CT

      9 reasons to buy Mustang MTL16:

      Sizes

      Clearance 310 mm and 229 mm 26 % more or 81 mm
      Ground clearance at maximum lifting and unloading 2370 mm and 2340 mm 1 % more or 30 mm
      Machine rear swing radius from center 1549 mm and 1550 mm 0 % less or 1 mm

      Operation

      Fuel Capacity 75 l. and 65.5 l. 13 % more or 9.5 l.
      Hydraulic system fluid volume 59.8 l. and 41.5 l. 31 % more or 18.3 l.

      Motor

      Power measured at 2400 rev / min and 2300 rev / min 4 % more or 100 rev
      Torque measured at 1600 rev / min and 1400 rev / min 12 % more or 200 rev

      Load-transfer device

      Tipping load 2100 kg and 3175 kg 34 % less or 1075 kg

      Hydraulic system

      Pump flow rate 68 l/min and 80 l/min 15 % less or 12 l/min

      13 reasons to buy Case 445CT:

      Sizes

      Radius at maximum lifting and unloading 860 mm and 851 mm 1 % more or 9 mm
      Turning radius with bucket from center 2130 mm and 2362 mm 10 % less or 232 mm

      Operation

      Generator current strength 95 amperes and 40 amperes 58 % more or 55 amperes
      Maximum speed at low range 8.2 km/h and 7.2 km/h 12 % more or 1.0 km/h
      Cooling system fluid volume 17 l. and 11 l. 35 % more or 6 l.
      Maximum speed at high range 12.8 km/h and 10.1 km/h 21 % more or 2.7 km/h
      Engine oil volume 12 l. and 10.2 l. 15 % more or 1.8 l.

      Motor

      Full power 60 kW and 49 kW 18 % more or 11 kW
      Peak torque 320 Nm and 244 Nm 24 % more or 76 Nm
      Displacement 4.5 l. and 3.3 l. 27 % more or 1.2 l.

      Load-transfer device

      Breakout power 2343.7 kg and 3051 kg 23 % less or 707.3 kg

      Carrier

      Specific ground pressure 27.6 kPa and 33.5 kPa 18 % less or 5.9 kPa
      Caterpillar track width 450 mm and 320 mm 29 % more or 130 mm

      Neutral reasons:

      Sizes

      Length with bucket 3543 mm and 3440 mm
      Length without bucket 2756 mm and 2620 mm
      Height to cab upper part 2123 mm and 2030 mm
      Width between caterpillar tracks 1580 mm and 2098 mm

      Operation

      Working weight 3401 kg and 4452 kg
      Operating voltage 12 V and 12 V

      Motor

      Model 4TNV98 and Family III 445/M2
      Manufacturer Yanmar and Case
      Cylinders number 4 and 4
      Aspiration natural aspiration and natural aspiration

      Load-transfer device

      Workload 1050 kg and 1588 kg

      Hydraulic system

      Overflow valve pressure 20600 kPa and 20684.3 kPa

      Carrier

      Rolling bearings number on either side 4 and 4
      Caterpillar track length on ground level 1389 mm and 1645 mm
      Track width 1260 mm and 1661 mm

      Images

      Sizes

      1. Length with bucket 3543 mm 1. Length with bucket 3440 mm
      2. Width between caterpillar tracks 1580 mm 2. Width between caterpillar tracks 2098 mm
      3. Height to cab upper part 2123 mm 3. Height to cab upper part 2030 mm
      5. Clearance 310 mm 5. Clearance 229 mm
      6. Length without bucket 2756 mm 6. Length without bucket 2620 mm
      7. Ground clearance at maximum lifting and unloading 2370 mm 7. Ground clearance at maximum lifting and unloading 2340 mm
      8. Radius at maximum lifting and unloading 851 mm 8. Radius at maximum lifting and unloading 860 mm

      Carrier

      4. Caterpillar track length on ground level 1389 mm 4. Caterpillar track length on ground level 1645 mm
      9. Track width 1260 mm 9. Track width 1661 mm