vs.

      Mustang MTL20 vs. Takeuchi TL120

      15 reasons to buy Mustang MTL20:

      Sizes

      Radius at maximum lifting and unloading 874 mm and 586.7 mm 33 % more or 287.3 mm
      Clearance 325 mm and 20.7 mm 94 % more or 304.3 mm

      Operation

      Generator current strength 50 amperes and 40 amperes 20 % more or 10 amperes
      Maximum speed at low range 7.2 km/h and 6.4 km/h 11 % more or 0.8 km/h
      Maximum speed at high range 10.3 km/h and 9.3 km/h 10 % more or 1.0 km/h
      Fuel Capacity 90 l. and 57.9 l. 36 % more or 32.1 l.
      Cooling system fluid volume 15.1 l. and 11 l. 27 % more or 4.1 l.
      Engine oil volume 9.4 l. and 7.4 l. 21 % more or 2.0 l.
      Hydraulic system fluid volume 83 l. and 29.2 l. 65 % more or 53.8 l.

      Motor

      Peak torque 258 Nm and 166.8 Nm 35 % more or 91.2 Nm
      Torque measured at 1800 rev / min and 1680 rev / min 7 % more or 120 rev
      Displacement 3.1 l. and 2 l. 35 % more or 1.1 l.
      Full power 60 kW and 38.8 kW 35 % more or 21.2 kW

      Carrier

      Caterpillar track width 457 mm and 296.4 mm 35 % more or 160.6 mm
      Specific ground pressure 28.3 kPa and 31.7 kPa 11 % less or 3.4 kPa

      6 reasons to buy Takeuchi TL120:

      Sizes

      Ground clearance at maximum lifting and unloading 2905.7 mm and 2408 mm 17 % more or 497.7 mm
      Machine rear swing radius from center 1501.1 mm and 1666 mm 10 % less or 164.9 mm
      Turning radius with bucket from center 2057.4 mm and 2294 mm 10 % less or 236.6 mm

      Motor

      Power measured at 2800 rev / min and 2400 rev / min 14 % more or 400 rev

      Load-transfer device

      Tipping load 1609.8 kg and 2700 kg 40 % less or 1090.2 kg

      Hydraulic system

      Pump flow rate 57.2 l/min and 75 l/min 24 % less or 17.8 l/min

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1770 mm and 1470.7 mm
      Length with bucket 3708 mm and 3220.7 mm
      Height to cab upper part 2167 mm and 1971.1 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 4350 kg and 2699.8 kg

      Motor

      Cylinders number 4 and 4
      Manufacturer Isuzu and Yanmar
      Model 4JG1T and 4TNV84T

      Load-transfer device

      Workload 1350 kg and 565.2 kg

      Hydraulic system

      Overflow valve pressure 20600 kPa and 20684.3 kPa

      Carrier

      Rolling bearings number on either side 4 and 4
      Caterpillar track length on ground level 1499 mm and 1242.1 mm

      Images

      Sizes

      1. Length with bucket 3708 mm 1. Length with bucket 3220.7 mm
      2. Width between caterpillar tracks 1770 mm 2. Width between caterpillar tracks 1470.7 mm
      3. Height to cab upper part 2167 mm 3. Height to cab upper part 1971.1 mm
      5. Clearance 325 mm 5. Clearance 20.7 mm
      7. Ground clearance at maximum lifting and unloading 2408 mm 7. Ground clearance at maximum lifting and unloading 2905.7 mm
      8. Radius at maximum lifting and unloading 874 mm 8. Radius at maximum lifting and unloading 586.7 mm

      Carrier

      4. Caterpillar track length on ground level 1499 mm 4. Caterpillar track length on ground level 1242.1 mm