- Home/
- Comparison/
- Rough Terrain Truck/
- New Holland C185 vs. Takeuchi TL240
New Holland C185 vs. Takeuchi TL240
9 reasons to buy New Holland C185:
Sizes
Ground clearance at maximum lifting and unloading | 3840 mm and 2408 mm | 37 % more or 1432 mm |
Turning radius with bucket from center | 2030 mm and 2362 mm | 14 % less or 332 mm |
Operation
Cooling system fluid volume | 17 l. and 16.5 l. | 3 % more or 0.5 l. |
Generator current strength | 95 amperes and 40 amperes | 58 % more or 55 amperes |
Maximum speed at low range | 8.2 km/h and 7.6 km/h | 7 % more or 0.6 km/h |
Maximum speed at high range | 12.9 km/h and 11.6 km/h | 10 % more or 1.3 km/h |
Motor
Peak torque | 310 Nm and 296.9 Nm | 4 % more or 13.1 Nm |
Displacement | 3.4 l. and 3.3 l. | 3 % more or 0.1 l. |
Hydraulic system
Pump flow rate | 73.1 l/min and 76 l/min | 4 % less or 2.9 l/min |
13 reasons to buy Takeuchi TL240:
Sizes
Clearance | 325 mm and 257 mm | 21 % more or 68 mm |
Radius at maximum lifting and unloading | 875 mm and 830 mm | 5 % more or 45 mm |
Operation
Hydraulic system fluid volume | 75 l. and 57 l. | 24 % more or 18 l. |
Engine oil volume | 10.2 l. and 8 l. | 22 % more or 2.2 l. |
Fuel Capacity | 90 l. and 68.1 l. | 24 % more or 21.9 l. |
Motor
Full power | 64.1 kW and 58 kW | 10 % more or 6.1 kW |
Power measured at | 2500 rev / min and 2300 rev / min | 8 % more or 200 rev |
Effective power | 61.9 kW and 54 kW | 13 % more or 7.9 kW |
Torque measured at | 1850 rev / min and 1400 rev / min | 24 % more or 450 rev |
Cylinders number | 4 and 3 | 25 % more or 1 |
Load-transfer device
Tipping load | 2699 kg and 3305 kg | 18 % less or 606 kg |
Carrier
Rolling bearings number on either side | 5 and 4 | 20 % more or 1 |
Caterpillar track width | 450 mm and 440 mm | 2 % more or 10 mm |
Neutral reasons:
Sizes
Height to cab upper part | 1980 mm and 2270 mm |
Width between caterpillar tracks | 2090 mm and 1770 mm |
Length with bucket | 3550 mm and 3810 mm |
Operation
Operating voltage | 12 V and 12 V |
Working weight | 4152 kg and 4701 kg |
Motor
Manufacturer | New Holland and Yanmar |
Model | 334TM2 and 4TNV98I |
Aspiration | turbocharging and turbocharging |
Load-transfer device
Workload | 1134 kg and 944 kg |
Hydraulic system
Overflow valve pressure | 21029 kPa and 20684.3 kPa |
Carrier
Caterpillar track length on ground level | 1640 mm and 1495 mm |
Images
Sizes
1. Length with bucket | 3550 mm | 1. Length with bucket | 3810 mm |
2. Width between caterpillar tracks | 2090 mm | 2. Width between caterpillar tracks | 1770 mm |
3. Height to cab upper part | 1980 mm | 3. Height to cab upper part | 2270 mm |
5. Clearance | 257 mm | 5. Clearance | 325 mm |
7. Ground clearance at maximum lifting and unloading | 3840 mm | 7. Ground clearance at maximum lifting and unloading | 2408 mm |
8. Radius at maximum lifting and unloading | 830 mm | 8. Radius at maximum lifting and unloading | 875 mm |
Carrier
4. Caterpillar track length on ground level | 1640 mm | 4. Caterpillar track length on ground level | 1495 mm |