vs.

      New Holland C190 vs. Case 420CT serie 3

      15 reasons to buy New Holland C190:

      Sizes

      Clearance 257 mm and 213 mm 17 % more or 44 mm
      Ground clearance at maximum lifting and unloading 3890 mm and 2420 mm 38 % more or 1470 mm
      Radius at maximum lifting and unloading 810 mm and 630 mm 22 % more or 180 mm
      Turning radius with bucket from center 2045 mm and 2050 mm 0 % less or 5 mm

      Operation

      Cooling system fluid volume 17 l. and 11.4 l. 33 % more or 5.6 l.
      Engine oil volume 12 l. and 8.5 l. 29 % more or 3.5 l.
      Hydraulic system fluid volume 57 l. and 50 l. 12 % more or 7 l.

      Motor

      Full power 60 kW and 55.2 kW 8 % more or 4.8 kW
      Effective power 55 kW and 51.5 kW 6 % more or 3.5 kW
      Peak torque 320 Nm and 275.2 Nm 14 % more or 44.8 Nm
      Displacement 4.5 l. and 3.2 l. 29 % more or 1.3 l.

      Hydraulic system

      Pump flow rate 82.9 l/min and 90 l/min 8 % less or 7.1 l/min

      Carrier

      Specific ground pressure 33.1 kPa and 40 kPa 17 % less or 6.9 kPa
      Rolling bearings number on either side 4 and 3 25 % more or 1
      Caterpillar track width 440 mm and 320 mm 27 % more or 120 mm

      5 reasons to buy Case 420CT serie 3:

      Operation

      Fuel Capacity 83.3 l. and 81.4 l. 2 % more or 1.9 l.
      Maximum speed at low range 9.3 km/h and 8.2 km/h 12 % more or 1.1 km/h
      Maximum speed at high range 13.5 km/h and 12.9 km/h 4 % more or 0.6 km/h

      Motor

      Power measured at 2500 rev / min and 2300 rev / min 8 % more or 200 rev

      Load-transfer device

      Tipping load 2592.3 kg and 3758 kg 31 % less or 1165.7 kg

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 2090 mm and 1651 mm
      Length with bucket 3770 mm and 3290 mm
      Height to cab upper part 2020 mm and 2020 mm

      Operation

      Working weight 4450 kg and 3783 kg
      Operating voltage 12 V and 12 V
      Generator current strength 95 amperes and 95 amperes

      Motor

      Manufacturer New Holland and Case
      Model 445M2 and 432T/M3
      Torque measured at 1400 rev / min and 1400 rev / min
      Cylinders number 4 and 4

      Load-transfer device

      Workload 1316 kg and 1297.3 kg

      Hydraulic system

      Type of pump gear type pump and gear type pump

      Carrier

      Caterpillar track length on ground level 1640 mm and 1438 mm

      Images

      Sizes

      1. Length with bucket 3770 mm 1. Length with bucket 3290 mm
      2. Width between caterpillar tracks 2090 mm 2. Width between caterpillar tracks 1651 mm
      3. Height to cab upper part 2020 mm 3. Height to cab upper part 2020 mm
      5. Clearance 257 mm 5. Clearance 213 mm
      7. Ground clearance at maximum lifting and unloading 3890 mm 7. Ground clearance at maximum lifting and unloading 2420 mm
      8. Radius at maximum lifting and unloading 810 mm 8. Radius at maximum lifting and unloading 630 mm

      Carrier

      4. Caterpillar track length on ground level 1640 mm 4. Caterpillar track length on ground level 1438 mm