vs.

      Takeuchi TL150 vs. Case 445CT

      10 reasons to buy Takeuchi TL150:

      Sizes

      Clearance 335.3 mm and 229 mm 32 % more or 106.3 mm
      Ground clearance at maximum lifting and unloading 3202.9 mm and 2340 mm 27 % more or 862.9 mm
      Radius at maximum lifting and unloading 985.5 mm and 860 mm 13 % more or 125.5 mm

      Operation

      Engine oil volume 14 l. and 12 l. 14 % more or 2 l.
      Hydraulic system fluid volume 64 l. and 41.5 l. 35 % more or 22.5 l.
      Fuel Capacity 107.9 l. and 65.5 l. 39 % more or 42.4 l.

      Motor

      Full power 72.3 kW and 60 kW 17 % more or 12.3 kW
      Peak torque 394.5 Nm and 320 Nm 19 % more or 74.5 Nm

      Carrier

      Rolling bearings number on either side 6 and 4 33 % more or 2
      Caterpillar track width 457.2 mm and 450 mm 2 % more or 7.2 mm

      12 reasons to buy Case 445CT:

      Sizes

      Machine rear swing radius from center 1550 mm and 1745 mm 11 % less or 195 mm
      Turning radius with bucket from center 2130 mm and 2433.3 mm 12 % less or 303.3 mm

      Operation

      Generator current strength 95 amperes and 60 amperes 37 % more or 35 amperes
      Maximum speed at low range 8.2 km/h and 7.7 km/h 6 % more or 0.5 km/h
      Maximum speed at high range 12.8 km/h and 11.1 km/h 13 % more or 1.7 km/h
      Cooling system fluid volume 17 l. and 15.1 l. 11 % more or 1.9 l.

      Motor

      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev
      Displacement 4.5 l. and 4.4 l. 2 % more or 0.1 l.

      Load-transfer device

      Tipping load 3175 kg and 3200.5 kg 1 % less or 25.5 kg
      Breakout power 2343.7 kg and 3942.6 kg 41 % less or 1598.9 kg

      Hydraulic system

      Pump flow rate 80 l/min and 88.6 l/min 10 % less or 8.6 l/min

      Carrier

      Specific ground pressure 27.6 kPa and 29.6 kPa 7 % less or 2.0 kPa

      Neutral reasons:

      Sizes

      Length with bucket 3931.9 mm and 3440 mm
      Height to cab upper part 2319 mm and 2030 mm
      Width between caterpillar tracks 1859.3 mm and 2098 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 4945.1 kg and 4452 kg

      Motor

      Manufacturer Yanmar and Case
      Model 4TNV106T and Family III 445/M2
      Torque measured at 1400 rev / min and 1400 rev / min
      Cylinders number 4 and 4

      Load-transfer device

      Workload 1120.4 kg and 1588 kg

      Hydraulic system

      Overflow valve pressure 20587.7 kPa and 20684.3 kPa

      Carrier

      Caterpillar track length on ground level 1597.7 mm and 1645 mm

      Images

      Sizes

      1. Length with bucket 3931.9 mm 1. Length with bucket 3440 mm
      2. Width between caterpillar tracks 1859.3 mm 2. Width between caterpillar tracks 2098 mm
      3. Height to cab upper part 2319 mm 3. Height to cab upper part 2030 mm
      5. Clearance 335.3 mm 5. Clearance 229 mm
      7. Ground clearance at maximum lifting and unloading 3202.9 mm 7. Ground clearance at maximum lifting and unloading 2340 mm
      8. Radius at maximum lifting and unloading 985.5 mm 8. Radius at maximum lifting and unloading 860 mm

      Carrier

      4. Caterpillar track length on ground level 1597.7 mm 4. Caterpillar track length on ground level 1645 mm