vs.

      Takeuchi TL240 vs. Case 445CT

      12 reasons to buy Takeuchi TL240:

      Sizes

      Clearance 325 mm and 229 mm 30 % more or 96 mm
      Ground clearance at maximum lifting and unloading 2408 mm and 2340 mm 3 % more or 68 mm
      Radius at maximum lifting and unloading 875 mm and 860 mm 2 % more or 15 mm

      Operation

      Hydraulic system fluid volume 75 l. and 41.5 l. 45 % more or 33.5 l.
      Fuel Capacity 90 l. and 65.5 l. 27 % more or 24.5 l.

      Motor

      Torque measured at 1850 rev / min and 1400 rev / min 24 % more or 450 rev
      Full power 64.1 kW and 60 kW 6 % more or 4.1 kW
      Effective power 61.9 kW and 55.2 kW 11 % more or 6.7 kW
      Power measured at 2500 rev / min and 2300 rev / min 8 % more or 200 rev

      Load-transfer device

      Tipping load 2699 kg and 3175 kg 15 % less or 476 kg

      Hydraulic system

      Pump flow rate 76 l/min and 80 l/min 5 % less or 4 l/min

      Carrier

      Rolling bearings number on either side 5 and 4 20 % more or 1

      10 reasons to buy Case 445CT:

      Sizes

      Machine rear swing radius from center 1550 mm and 1670 mm 7 % less or 120 mm
      Turning radius with bucket from center 2130 mm and 2362 mm 10 % less or 232 mm

      Operation

      Generator current strength 95 amperes and 40 amperes 58 % more or 55 amperes
      Maximum speed at low range 8.2 km/h and 7.6 km/h 7 % more or 0.6 km/h
      Maximum speed at high range 12.8 km/h and 11.6 km/h 9 % more or 1.2 km/h
      Cooling system fluid volume 17 l. and 16.5 l. 3 % more or 0.5 l.
      Engine oil volume 12 l. and 10.2 l. 15 % more or 1.8 l.

      Motor

      Peak torque 320 Nm and 296.9 Nm 7 % more or 23.1 Nm
      Displacement 4.5 l. and 3.3 l. 27 % more or 1.2 l.

      Carrier

      Specific ground pressure 27.6 kPa and 30.3 kPa 9 % less or 2.7 kPa

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1770 mm and 2098 mm
      Length with bucket 3810 mm and 3440 mm
      Height to cab upper part 2270 mm and 2030 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 4701 kg and 4452 kg

      Motor

      Manufacturer Yanmar and Case
      Model 4TNV98I and Family III 445/M2
      Cylinders number 4 and 4
      Aspiration turbocharging and natural aspiration

      Load-transfer device

      Workload 944 kg and 1588 kg

      Hydraulic system

      Overflow valve pressure 20684.3 kPa and 20684.3 kPa

      Carrier

      Caterpillar track length on ground level 1495 mm and 1645 mm
      Caterpillar track width 450 mm and 450 mm

      Images

      Sizes

      1. Length with bucket 3810 mm 1. Length with bucket 3440 mm
      2. Width between caterpillar tracks 1770 mm 2. Width between caterpillar tracks 2098 mm
      3. Height to cab upper part 2270 mm 3. Height to cab upper part 2030 mm
      5. Clearance 325 mm 5. Clearance 229 mm
      7. Ground clearance at maximum lifting and unloading 2408 mm 7. Ground clearance at maximum lifting and unloading 2340 mm
      8. Radius at maximum lifting and unloading 875 mm 8. Radius at maximum lifting and unloading 860 mm

      Carrier

      4. Caterpillar track length on ground level 1495 mm 4. Caterpillar track length on ground level 1645 mm