- Home/
- Comparison/
- Mining Dump Truck/
- Caterpillar 785C vs. Euclid R60
Caterpillar 785C vs. Euclid R60
16 reasons to buy Caterpillar 785C:
Weight
Unloaded rear weight distribution | 53 % and 51 % | 4 % more or 2 % |
Loaded front weight distribution | 33 % and 32 % | 3 % more or 1 % |
Sizes
Clearance | 987 mm and 762 mm | 23 % more or 225 mm |
Unloading ground clearance | 1284 mm and 762 mm | 41 % more or 522 mm |
Operation
Cooling system fluid volume | 379 l. and 189.3 l. | 50 % more or 189.7 l. |
Engine oil volume | 90 l. and 60.6 l. | 33 % more or 29.4 l. |
Steering system fluid volume | 117 l. and 98.4 l. | 16 % more or 18.6 l. |
Brake / lift system fluid volume | 337 l. and 174.1 l. | 48 % more or 162.9 l. |
Hydraulic system fluid volume | 641 l. and 272.5 l. | 57 % more or 368.5 l. |
Fuel Capacity | 1893 l. and 700.2 l. | 63 % more or 1192.8 l. |
Motor
Full power | 1082 kW and 522 kW | 52 % more or 560 kW |
Effective power | 1005 kW and 498 kW | 50 % more or 507 kW |
Displacement | 51.8 l. and 18.8 l. | 64 % more or 33.0 l. |
Cylinders number | 16 and 6 | 62 % more or 10 |
Dump
Brimmed lifting capacity | 74 m3 and 25 m3 | 66 % more or 49 m3 |
Lifting capacity with top | 91 m3 and 36 m3 | 60 % more or 55 m3 |
7 reasons to buy Euclid R60:
Weight
Loaded rear weight distribution | 68 % and 67 % | 1 % more or 1 % |
Unloaded front weight distribution | 49 % and 47 % | 4 % more or 2 % |
Motor
Power measured at | 2100 rev / min and 1750 rev / min | 17 % more or 350 rev |
Gear box
Reverse gears number | 2 and 1 | 50 % more or 1 |
Maximum speed | 57.6 km/h and 54.8 km/h | 5 % more or 2.8 km/h |
Dump
Lowering time | 14 sec and 15.9 sec | 12 % less or 1.9 sec |
Lifting time | 10 sec and 15.2 sec | 34 % less or 5.2 sec |
Neutral reasons:
Weight
Weight without load | 102150 kg and 38718 kg |
Laden weight | 249480 kg and 96000 kg |
Sizes
Dimensional length | 11024 mm and 9296.4 mm |
Overall width | 6277 mm and 4444 mm |
Headroom | 5769 mm and 4242.8 mm |
Wheelbase | 5182 mm and 4291.6 mm |
Unloading height | 11207 mm and 8915.4 mm |
Operation
Tyre size | 33.00-R51 tires and 24.00-35(36)E3 |
Operating voltage | 24 V and 24 V |
Generator current strength | 75 amperes and 75 amperes |
Motor
Manufacturer | Caterpillar and Cummins |
Aspiration | turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator) |
Model | 3512B-EUI and KTTA19-C |
Gear box
Transmission type | 6-speed planetary and Allison CLT-6063 |
Forward gears number | 6 and 6 |
Dump
Nominal payload | 136077.7 kg and 57283 kg |
Discharge angle | 49 degrees and 60 degrees |
Images
Sizes
1. Dimensional length | 11024 mm | 1. Dimensional length | 9296.4 mm |
2. Overall width | 6277 mm | 2. Overall width | 4444 mm |
3. Headroom | 5769 mm | 3. Headroom | 4242.8 mm |
4. Wheelbase | 5182 mm | 4. Wheelbase | 4291.6 mm |
5. Clearance | 987 mm | 5. Clearance | 762 mm |
6. Unloading height | 11207 mm | 6. Unloading height | 8915.4 mm |
7. Unloading ground clearance | 1284 mm | 7. Unloading ground clearance | 762 mm |
Dump
8. Discharge angle | 49 degrees | 8. Discharge angle | 60 degrees |