- Home/
- Comparison/
- Mining Excavator/
- Liebherr R9250 vs. Hitachi EX2500
Liebherr R9250 vs. Hitachi EX2500
13 reasons to buy Liebherr R9250:
Sizes
Caterpillar track length | 8240 mm and 7870 mm | 4 % more or 370 mm |
Shovel boom/sections 1
Maximum excavation depth | 8700 mm and 8570 mm | 1 % more or 130 mm |
Shovel
Bucket initial volume | 17 m3 and 15 m3 | 12 % more or 2 m3 |
Operation
Hydraulic system fluid volume | 4050 l. and 2950 l. | 27 % more or 1100 l. |
Rotation speed | 4.1 rev / min and 3.8 rev / min | 7 % more or 0.3 rev |
Generator current strength | 260 amperes and 150 amperes | 42 % more or 110 amperes |
Fuel Capacity | 5440 l. and 3600 l. | 34 % more or 1840 l. |
Loading bucket
Maximum excavation depth | 3800 mm and 3720 mm | 2 % more or 80 mm |
Maximum unloading height | 11000 mm and 10350 mm | 6 % more or 650 mm |
Carrier
Loading shovel operational weight | 253500 kg and 242000 kg | 5 % more or 11500 kg |
Maximum travel speed | 2.7 km/h and 2.3 km/h | 15 % more or 0.4 km/h |
Lower rollers number | 9 and 8 | 11 % more or 1 |
Unloaded backhoe shovel operational weight with support 1 | 250000 kg and 239000 kg | 4 % more or 11000 kg |
10 reasons to buy Hitachi EX2500:
Sizes
Clearance | 800 mm and 625 mm | 22 % more or 175 mm |
Upper structure clearance | 2230 mm and 2205 mm | 1 % more or 25 mm |
Shovel boom/sections 1
Maximum unloading height | 10360 mm and 10300 mm | 1 % more or 60 mm |
Maximum radius on ground level | 16500 mm and 15500 mm | 6 % more or 1000 mm |
Motor
Full power | 1006.7 kW and 960 kW | 5 % more or 46.7 kW |
Loading bucket
Maximum digging radius | 14060 mm and 13000 mm | 8 % more or 1060 mm |
Carrier
Bucket loader support width | 1000 mm and 850 mm | 15 % more or 150 mm |
Bucket loader specific ground pressure | 174 kPa and 207.9 kPa | 16 % less or 33.9 kPa |
Upper rollers number | 3 and 2 | 33 % more or 1 |
Excavator specific ground pressure with support 1 | 172 kPa and 203.9 kPa | 16 % less or 31.9 kPa |
Neutral reasons:
Sizes
Rear platform swing radius | 6140 mm and 6290 mm |
Height to cab upper part | 7250 mm and 7040 mm |
Caterpillar track length on ground level | 6400 mm and 6120 mm |
Width between caterpillar tracks | 6100 mm and 6000 mm |
Caterpillar track height | 2180 mm and 2060 mm |
Shovel boom/sections 1
Backhoe shovel boom / section | 9 m boom / 4 m Section and 9000mm boom with 4200mm with lever |
Maximum cut height | 15200 mm and 16160 mm |
Operation
Operating voltage | 24 V and 24 V |
Motor
Power measured at | 1800 rev / min and 1800 rev / min |
Displacement | 45 l. and 45 l. |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with subsequent air cooling (by a cooling radiator) |
Cylinders number | 12 and 12 |
Manufacturer | Cummins and Cummins |
Model | QSK45 and QSK45-C |
Loading bucket
Handle pressure force | 1210 Nm and 918 Nm |
Loading bucket | 6.37 m boom / 4.2 m Section and standard 15 cu. m |
Maximum cut height | 12800 mm and 15010 mm |
Carrier
Track width | 4900 mm and 5000 mm |
Backhoe shovel support width 1 | 850 mm and 1000 mm |
Images
Sizes
2. Width between caterpillar tracks | 6100 mm | 2. Width between caterpillar tracks | 6000 mm |
4. Caterpillar track length on ground level | 6400 mm | 4. Caterpillar track length on ground level | 6120 mm |
5. Clearance | 625 mm | 5. Clearance | 800 mm |
7. Height to cab upper part | 7250 mm | 7. Height to cab upper part | 7040 mm |
8. Rear platform swing radius | 6140 mm | 8. Rear platform swing radius | 6290 mm |
Loading bucket
20. Maximum excavation depth | 3800 mm | 20. Maximum excavation depth | 3720 mm |
17. Maximum cut height | 12800 mm | 17. Maximum cut height | 15010 mm |
18. Maximum unloading height | 11000 mm | 18. Maximum unloading height | 10350 mm |
19. Maximum digging radius | 13000 mm | 19. Maximum digging radius | 14060 mm |
Carrier
6. Track width | 4900 mm | 6. Track width | 5000 mm |
14. Bucket loader support width | 850 mm | 14. Bucket loader support width | 1000 mm |