- Home/
- Comparison/
- Mining Excavator/
- Liebherr R984C vs. Hitachi EX3600
Liebherr R984C vs. Hitachi EX3600
5 reasons to buy Liebherr R984C:
Operation
Rotation speed | 5.2 rev / min and 3.2 rev / min | 38 % more or 2.0 rev |
Motor
Power measured at | 2100 rev / min and 1600 rev / min | 24 % more or 500 rev |
Carrier
Bucket loader specific ground pressure | 180.2 kPa and 181 kPa | 0 % less or 0.8 kPa |
Maximum travel speed | 2.9 km/h and 2.2 km/h | 24 % more or 0.7 km/h |
Lower rollers number | 9 and 8 | 11 % more or 1 |
19 reasons to buy Hitachi EX3600:
Sizes
Clearance | 905 mm and 860 mm | 5 % more or 45 mm |
Upper structure clearance | 2540 mm and 1830 mm | 28 % more or 710 mm |
Caterpillar track length | 8700 mm and 6471 mm | 26 % more or 2229 mm |
Shovel boom/sections 1
Maximum excavation depth | 8580 mm and 7950 mm | 7 % more or 630 mm |
Maximum unloading height | 11590 mm and 9200 mm | 21 % more or 2390 mm |
Maximum radius on ground level | 17600 mm and 13700 mm | 22 % more or 3900 mm |
Shovel
Bucket initial volume | 21 m3 and 7 m3 | 67 % more or 14 m3 |
Operation
Generator current strength | 150 amperes and 100 amperes | 33 % more or 50 amperes |
Hydraulic system fluid volume | 4000 l. and 1660 l. | 58 % more or 2340 l. |
Fuel Capacity | 7200 l. and 1585 l. | 78 % more or 5615 l. |
Motor
Effective power | 1401.9 kW and 529.4 kW | 62 % more or 872.5 kW |
Displacement | 65.4 l. and 18.9 l. | 71 % more or 46.5 l. |
Cylinders number | 16 and 6 | 62 % more or 10 |
Loading bucket
Maximum excavation depth | 3910 mm and 3800 mm | 3 % more or 110 mm |
Maximum unloading height | 10990 mm and 8900 mm | 19 % more or 2090 mm |
Maximum digging radius | 15220 mm and 10800 mm | 29 % more or 4420 mm |
Carrier
Upper rollers number | 3 and 2 | 33 % more or 1 |
Bucket loader support width | 1270 mm and 600 mm | 53 % more or 670 mm |
Loading shovel operational weight | 350000 kg and 123800 kg | 65 % more or 226200 kg |
Neutral reasons:
Sizes
Caterpillar track length on ground level | 5055 mm and 6660 mm |
Width between caterpillar tracks | 4830 mm and 6770 mm |
Height to cab upper part | 4455 mm and 7750 mm |
Caterpillar track height | 1745 mm and 2305 mm |
Rear platform swing radius | 4805 mm and 6780 mm |
Shovel boom/sections 1
Backhoe shovel boom / section | 7.8 m boom / 3.4 m Section and length of shovel boom 9600mm with lever - elongation 4500mm |
Maximum cut height | 14000 mm and 17690 mm |
Operation
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Cummins and Hitachi |
Model | QSK-19 C 750 and S16R-Y1TAA1 |
Aspiration | turbocharged engine with reduced emissions and Turbocharged engine with intermediate cooling of charging air by oncoming air flow |
Loading bucket
Loading bucket | Bucket attachment and standard |
Maximum cut height | 9300 mm and 16300 mm |
Carrier
Rear platform swing radius | 4805 mm and 6780 mm |
Track width | 3986.8 mm and 5500 mm |
Backhoe shovel support width 1 | 500 mm and 1270 mm |
Images
Sizes
2. Width between caterpillar tracks | 4830 mm | 2. Width between caterpillar tracks | 6770 mm |
4. Caterpillar track length on ground level | 5055 mm | 4. Caterpillar track length on ground level | 6660 mm |
5. Clearance | 860 mm | 5. Clearance | 905 mm |
7. Height to cab upper part | 4455 mm | 7. Height to cab upper part | 7750 mm |
8. Rear platform swing radius | 4805 mm | 8. Rear platform swing radius | 6780 mm |
Loading bucket
18. Maximum unloading height | 8900 mm | 18. Maximum unloading height | 10990 mm |
19. Maximum digging radius | 10800 mm | 19. Maximum digging radius | 15220 mm |
20. Maximum excavation depth | 3800 mm | 20. Maximum excavation depth | 3910 mm |
17. Maximum cut height | 9300 mm | 17. Maximum cut height | 16300 mm |
Carrier
6. Track width | 3986.8 mm | 6. Track width | 5500 mm |
14. Bucket loader support width | 600 mm | 14. Bucket loader support width | 1270 mm |