- Home/
- Comparison/
- Wheel-Mounted Loader/
- Case 221E vs. Michigan L140
Case 221E vs. Michigan L140
5 reasons to buy Case 221E:
Operation
Turn radius | 4095 mm and 7442 mm | 45 % less or 3347 mm |
Motor
Torque measured at | 1700 rev / min and 1300 rev / min | 24 % more or 400 rev |
Power measured at | 2500 rev / min and 2000 rev / min | 20 % more or 500 rev |
Hydraulic system
Lifting time | 6 sec and 7.5 sec | 20 % less or 1.5 sec |
Unloading time | 1 sec and 1.5 sec | 33 % less or 0.5 sec |
23 reasons to buy Michigan L140:
Sizes
Clearance | 432 mm and 330 mm | 24 % more or 102 mm |
Radius at maximum lifting and unloading | 1041 mm and 867 mm | 17 % more or 174 mm |
Shovel
Bucket capacity with top | 3.1 m3 and 1 m3 | 68 % more or 2.1 m3 |
Breakout power | 191.7 kN and 4410 kN | 96 % less or 4218.3 kN |
Unloading ground clearance at maximum lifting | 2985 mm and 2598 mm | 13 % more or 387 mm |
Operation
Fuel Capacity | 344 l. and 100 l. | 71 % more or 244 l. |
Hydraulic system fluid volume | 329 l. and 67 l. | 80 % more or 262 l. |
Engine oil volume | 34.1 l. and 10 l. | 71 % more or 24.1 l. |
Front axle / differential fluid volume | 32.2 l. and 8 l. | 75 % more or 24.2 l. |
Rear axle / differential fluid volume | 32.2 l. and 8 l. | 75 % more or 24.2 l. |
Static tipping weight | 14996 kg and 4245 kg | 72 % more or 10751 kg |
Generator current strength | 100 amperes and 55 amperes | 45 % more or 45 amperes |
Motor
Displacement | 10 l. and 3.1 l. | 69 % more or 6.9 l. |
Maximum torque | 1016.9 Nm and 178 Nm | 82 % more or 838.9 Nm |
Cylinders number | 6 and 4 | 33 % more or 2 |
Effective power | 151.4 kW and 43 kW | 72 % more or 108.4 kW |
Full power | 167.8 kW and 45 kW | 73 % more or 122.8 kW |
Hydraulic system
Pump bandwidth | 117.3 l/min and 70 l/min | 40 % more or 47.3 l/min |
Lowering time | 2 sec and 3 sec | 33 % less or 1 sec |
Gear box
Forward gears number | 4 and 2 | 50 % more or 2 |
Reverse gears number | 4 and 2 | 50 % more or 2 |
Maximum forward speed | 32 km/h and 20 km/h | 37 % more or 12 km/h |
Maximum reverse gear | 32 km/h and 20 km/h | 37 % more or 12 km/h |
Neutral reasons:
Sizes
Length with bucket on ground level | 5635 mm and 8280 mm |
Between tyres width | 1904 mm and 2870 mm |
Height to cab upper part | 2793 mm and 3531 mm |
Wheelbase | 2350 mm and 3251 mm |
Hinge axis maximum height | 3386 mm and 4039 mm |
Shovel
Shovel width | 2100 mm and 3150 mm |
Operation
Rear axle oscillating | 24 degrees and 18.5 degrees |
Tyre size | 365/80 R20 EM SPT9 and 23.5-25 (16PR) L-3 |
Working weight | 5419 kg and 19150.7 kg |
Operating voltage | 12 V and 24 V |
Motor
Manufacturer | Deutz and Cummins |
Model | F4M2011, 2 level and LT-10-225 HT |
Hydraulic system
Type of pump | Open-centered with pressure/flow compensation and gear type pump |
Overflow valve pressure | 23000 kPa and 18960.6 kPa |
Gear box
Transmission type | Hydro-Static Transmission and Clark R32425-6 |
Images
Sizes
2. Between tyres width | 1904 mm | 2. Between tyres width | 2870 mm |
3. Height to cab upper part | 2793 mm | 3. Height to cab upper part | 3531 mm |
4. Wheelbase | 2350 mm | 4. Wheelbase | 3251 mm |
5. Clearance | 330 mm | 5. Clearance | 432 mm |
6. Hinge axis maximum height | 3386 mm | 6. Hinge axis maximum height | 4039 mm |
8. Radius at maximum lifting and unloading | 867 mm | 8. Radius at maximum lifting and unloading | 1041 mm |
1. Length with bucket on ground level | 5635 mm | 1. Length with bucket on ground level | 8280 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 2598 mm | 7. Unloading ground clearance at maximum lifting | 2985 mm |