- Home/
- Comparison/
- Wheel-Mounted Loader/
- Doosan DL160 vs. Case 821E
Doosan DL160 vs. Case 821E
7 reasons to buy Doosan DL160:
Operation
Engine oil volume | 26 l. and 21 l. | 19 % more or 5 l. |
Cooling system fluid volume | 44 l. and 40.9 l. | 7 % more or 3.1 l. |
Turn radius | 5390 mm and 6030 mm | 11 % less or 640 mm |
Motor
Power measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Hydraulic system
Pump bandwidth | 176 l/min and 119.6 l/min | 32 % more or 56.4 l/min |
Lifting time | 5.5 sec and 5.6 sec | 2 % less or 0.1 sec |
18 reasons to buy Case 821E:
Sizes
Clearance | 415.8 mm and 400 mm | 4 % more or 15.8 mm |
Radius at maximum lifting and unloading | 1130 mm and 1020 mm | 10 % more or 110 mm |
Shovel
Bucket capacity with top | 3.4 m3 and 1.6 m3 | 53 % more or 1.8 m3 |
Unloading ground clearance at maximum lifting | 2960 mm and 2745 mm | 7 % more or 215 mm |
Operation
Fuel Capacity | 288 l. and 185 l. | 36 % more or 103 l. |
Hydraulic system fluid volume | 174 l. and 100 l. | 43 % more or 74 l. |
Transmission fluid volume | 39.7 l. and 20 l. | 50 % more or 19.7 l. |
Front axle / differential fluid volume | 37.4 l. and 15 l. | 60 % more or 22.4 l. |
Rear axle / differential fluid volume | 23.7 l. and 15 l. | 37 % more or 8.7 l. |
Static tipping weight | 14232 kg and 6500 kg | 54 % more or 7732 kg |
Motor
Displacement | 6.7 l. and 4.5 l. | 33 % more or 2.2 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Maximum torque | 981.6 Nm and 461 Nm | 53 % more or 520.6 Nm |
Effective power | 148 kW and 80.5 kW | 46 % more or 67.5 kW |
Hydraulic system
Unloading time | 1.2 sec and 1.4 sec | 14 % less or 0.2 sec |
Lowering time | 2.8 sec and 3.3 sec | 15 % less or 0.5 sec |
Gear box
Maximum forward speed | 37 km/h and 33.8 km/h | 9 % more or 3.2 km/h |
Maximum reverse gear | 25.3 km/h and 21.7 km/h | 14 % more or 3.6 km/h |
Neutral reasons:
Sizes
Length with bucket on ground level | 6510 mm and 7890 mm |
Height to cab upper part | 3139 mm and 3450 mm |
Wheelbase | 2700 mm and 3340 mm |
Hinge axis maximum height | 3610 mm and 4120 mm |
Shovel
Shovel width | 2450 mm and 2930 mm |
Operation
Operating voltage | 24 V and 24 V |
Rear axle oscillating | 22 degrees and 24 degrees |
Tyre size | 17.5-25 and 23.5 x 25 l2 with diagonal cord |
Working weight | 8730 kg and 17166 kg |
Motor
Manufacturer | Cummins and Case |
Aspiration | turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator) |
Model | QSB4.5 and Family IV, 667TA/EBD 3 level |
Hydraulic system
Type of pump | 2x gear and in the middle position with locking with pressure / flow compensation |
Overflow valve pressure | 20000 kPa and 24821 kPa |
Gear box
Transmission type | powershift transmission and 4 forward / 3 reverse gears proportional with electronic control module |
Forward gears number | 4 and 4 |
Reverse gears number | 3 and 3 |
Images
Sizes
1. Length with bucket on ground level | 6510 mm | 1. Length with bucket on ground level | 7890 mm |
3. Height to cab upper part | 3139 mm | 3. Height to cab upper part | 3450 mm |
4. Wheelbase | 2700 mm | 4. Wheelbase | 3340 mm |
5. Clearance | 400 mm | 5. Clearance | 415.8 mm |
6. Hinge axis maximum height | 3610 mm | 6. Hinge axis maximum height | 4120 mm |
8. Radius at maximum lifting and unloading | 1020 mm | 8. Radius at maximum lifting and unloading | 1130 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 2745 mm | 7. Unloading ground clearance at maximum lifting | 2960 mm |