- Home/
- Comparison/
- Wheel-Mounted Loader/
- John Deere 244H vs. Zettelmeyer ZL602C
John Deere 244H vs. Zettelmeyer ZL602C
12 reasons to buy John Deere 244H:
Sizes
Radius at maximum lifting and unloading | 845 mm and 710 mm | 16 % more or 135 mm |
Shovel
Unloading ground clearance at maximum lifting | 2555 mm and 2470 mm | 3 % more or 85 mm |
Operation
Fuel Capacity | 70 l. and 60 l. | 14 % more or 10 l. |
Hydraulic system fluid volume | 73 l. and 60 l. | 18 % more or 13 l. |
Engine oil volume | 11.5 l. and 10.5 l. | 9 % more or 1.0 l. |
Turn radius | 3790 mm and 4090 mm | 7 % less or 300 mm |
Motor
Displacement | 3.3 l. and 2.7 l. | 18 % more or 0.6 l. |
Maximum torque | 225 Nm and 200.7 Nm | 11 % more or 24.3 Nm |
Hydraulic system
Pump bandwidth | 80 l/min and 52 l/min | 35 % more or 28 l/min |
Lifting time | 4.3 sec and 6 sec | 28 % less or 1.7 sec |
Gear box
Maximum forward speed | 32.2 km/h and 20 km/h | 38 % more or 12.2 km/h |
Maximum reverse gear | 32.2 km/h and 20 km/h | 38 % more or 12.2 km/h |
11 reasons to buy Zettelmeyer ZL602C:
Sizes
Clearance | 480 mm and 330 mm | 31 % more or 150 mm |
Shovel
Breakout power | 40.5 kN and 45.1 kN | 10 % less or 4.6 kN |
Operation
Front axle / differential fluid volume | 10 l. and 9.5 l. | 5 % more or 0.5 l. |
Rear axle / differential fluid volume | 11 l. and 9.5 l. | 14 % more or 1.5 l. |
Static tipping weight | 3500 kg and 3390.1 kg | 3 % more or 109.9 kg |
Generator current strength | 60 amperes and 35 amperes | 42 % more or 25 amperes |
Motor
Torque measured at | 1800 rev / min and 1300 rev / min | 28 % more or 500 rev |
Effective power | 42.5 kW and 41 kW | 4 % more or 1.5 kW |
Full power | 44.7 kW and 43 kW | 4 % more or 1.7 kW |
Power measured at | 2300 rev / min and 2200 rev / min | 4 % more or 100 rev |
Hydraulic system
Lowering time | 3 sec and 3.8 sec | 21 % less or 0.8 sec |
Neutral reasons:
Sizes
Between tyres width | 1930 mm and 1730 mm |
Length with bucket on ground level | 4950 mm and 5000 mm |
Height to cab upper part | 2995 mm and 2630 mm |
Wheelbase | 2200 mm and 2000 mm |
Hinge axis maximum height | 3160 mm and 3120 mm |
Shovel
Shovel width | 1990 mm and 1750 mm |
Operation
Tyre size | 17.5/65-20 and 12.5-20 |
Rear axle oscillating | 22 degrees and 20 degrees |
Working weight | 5157 kg and 4600 kg |
Operating voltage | 24 V and 12 V |
Motor
Cylinders number | 4 and 4 |
Aspiration | natural aspiration and turbo + oil/air cooling |
Model | 4TNE98 and KHD BF4 L 1011 FT |
Hydraulic system
Overflow valve pressure | 20615 kPa and 21994.3 kPa |
Gear box
Transmission type | Hydro-Static Transmission and hydrostatic powershift transmission |
Forward gears number | 2 and 2 |
Reverse gears number | 2 and 2 |
Images
Sizes
1. Length with bucket on ground level | 4950 mm | 1. Length with bucket on ground level | 5000 mm |
2. Between tyres width | 1930 mm | 2. Between tyres width | 1730 mm |
3. Height to cab upper part | 2995 mm | 3. Height to cab upper part | 2630 mm |
4. Wheelbase | 2200 mm | 4. Wheelbase | 2000 mm |
5. Clearance | 330 mm | 5. Clearance | 480 mm |
6. Hinge axis maximum height | 3160 mm | 6. Hinge axis maximum height | 3120 mm |
8. Radius at maximum lifting and unloading | 845 mm | 8. Radius at maximum lifting and unloading | 710 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 2555 mm | 7. Unloading ground clearance at maximum lifting | 2470 mm |