- Home/
- Comparison/
- Wheel-Mounted Loader/
- John Deere 824K Z-Bar vs. Zettelmeyer ZL18D
John Deere 824K Z-Bar vs. Zettelmeyer ZL18D
18 reasons to buy John Deere 824K Z-Bar:
Sizes
Radius at maximum lifting and unloading | 1280 mm and 780 mm | 39 % more or 500 mm |
Shovel
Unloading ground clearance at maximum lifting | 3190 mm and 2545 mm | 20 % more or 645 mm |
Operation
Front axle / differential fluid volume | 45.9 l. and 8.7 l. | 81 % more or 37.2 l. |
Rear axle / differential fluid volume | 45.9 l. and 11 l. | 76 % more or 34.9 l. |
Static tipping weight | 20508 kg and 4000 kg | 80 % more or 16508 kg |
Generator current strength | 80 amperes and 33 amperes | 59 % more or 47 amperes |
Fuel Capacity | 469.4 l. and 95 l. | 80 % more or 374.4 l. |
Hydraulic system fluid volume | 159 l. and 75 l. | 53 % more or 84 l. |
Engine oil volume | 37.9 l. and 11.5 l. | 70 % more or 26.4 l. |
Motor
Displacement | 13.5 l. and 3.8 l. | 72 % more or 9.7 l. |
Effective power | 248.3 kW and 46.6 kW | 81 % more or 201.7 kW |
Maximum torque | 1618.8 Nm and 215 Nm | 87 % more or 1403.8 Nm |
Cylinders number | 6 and 4 | 33 % more or 2 |
Hydraulic system
Pump bandwidth | 513 l/min and 80 l/min | 84 % more or 433 l/min |
Lifting time | 5.9 sec and 6 sec | 2 % less or 0.1 sec |
Lowering time | 2.5 sec and 3.5 sec | 29 % less or 1.0 sec |
Gear box
Maximum forward speed | 40 km/h and 20 km/h | 50 % more or 20 km/h |
Maximum reverse gear | 30.1 km/h and 20 km/h | 34 % more or 10.1 km/h |
6 reasons to buy Zettelmeyer ZL18D:
Sizes
Clearance | 520 mm and 460 mm | 12 % more or 60 mm |
Shovel
Breakout power | 56.8 kN and 185.4 kN | 69 % less or 128.6 kN |
Operation
Turn radius | 4285 mm and 5920 mm | 28 % less or 1635 mm |
Motor
Power measured at | 2500 rev / min and 1600 rev / min | 36 % more or 900 rev |
Torque measured at | 1600 rev / min and 900 rev / min | 44 % more or 700 rev |
Hydraulic system
Unloading time | 1 sec and 1.3 sec | 23 % less or 0.3 sec |
Neutral reasons:
Sizes
Height to cab upper part | 3500 mm and 2930 mm |
Wheelbase | 3460 mm and 2100 mm |
Length with bucket on ground level | 9260 mm and 5400 mm |
Hinge axis maximum height | 4480 mm and 3200 mm |
Shovel
Shovel width | 3270 mm and 2050 mm |
Operation
Tyre size | 26.5 R 25 and 14.5-20 |
Working weight | 26210 kg and 5710 kg |
Operating voltage | 24 V and 12 V |
Rear axle oscillating | 26 degrees and 26 degrees |
Motor
Manufacturer | John Deere and Deutz |
Model | 6135H, III Level III certified and F4L912 |
Hydraulic system
Type of pump | two variable displacement piston pumps, axial, with load sensing and gear type pump |
Overflow valve pressure | 25165.8 kPa and 20000 kPa |
Gear box
Transmission type | Powershift transmission of intermediate type and hydrostatic |
Images
Sizes
1. Length with bucket on ground level | 9260 mm | 1. Length with bucket on ground level | 5400 mm |
3. Height to cab upper part | 3500 mm | 3. Height to cab upper part | 2930 mm |
4. Wheelbase | 3460 mm | 4. Wheelbase | 2100 mm |
5. Clearance | 460 mm | 5. Clearance | 520 mm |
6. Hinge axis maximum height | 4480 mm | 6. Hinge axis maximum height | 3200 mm |
8. Radius at maximum lifting and unloading | 1280 mm | 8. Radius at maximum lifting and unloading | 780 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 3190 mm | 7. Unloading ground clearance at maximum lifting | 2545 mm |