vs.

      Liebherr L538 vs. Hyundai HL740-7

      9 reasons to buy Liebherr L538:

      Sizes

      Clearance 460 mm and 417 mm 9 % more or 43 mm

      Shovel

      Bucket capacity with top 2.5 m3 and 2.1 m3 16 % more or 0.4 m3
      Breakout power 105 kN and 116.5 kN 10 % less or 11.5 kN
      Unloading ground clearance at maximum lifting 2870 mm and 2850 mm 1 % more or 20 mm

      Operation

      Engine oil volume 20.5 l. and 16 l. 22 % more or 4.5 l.
      Static tipping weight 10160 kg and 9180.7 kg 10 % more or 979.3 kg

      Motor

      Full power 101.4 kW and 99.2 kW 2 % more or 2.2 kW
      Displacement 6.6 l. and 5.9 l. 11 % more or 0.7 l.

      Gear box

      Maximum reverse gear 34 km/h and 25.3 km/h 26 % more or 8.7 km/h

      15 reasons to buy Hyundai HL740-7:

      Operation

      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes
      Fuel Capacity 228 l. and 160 l. 30 % more or 68 l.
      Hydraulic system fluid volume 165 l. and 130 l. 21 % more or 35 l.
      Front axle / differential fluid volume 21.2 l. and 15.5 l. 27 % more or 5.7 l.
      Rear axle / differential fluid volume 21.2 l. and 15.5 l. 27 % more or 5.7 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev
      Maximum torque 588.4 Nm and 567 Nm 4 % more or 21.4 Nm

      Hydraulic system

      Pump bandwidth 177 l/min and 140 l/min 21 % more or 37 l/min
      Lifting time 5.5 sec and 6 sec 8 % less or 0.5 sec
      Unloading time 1.2 sec and 1.6 sec 25 % less or 0.4 sec
      Lowering time 2.8 sec and 4 sec 30 % less or 1.2 sec

      Gear box

      Reverse gears number 3 and 2 33 % more or 1
      Maximum forward speed 38.2 km/h and 34 km/h 11 % more or 4.2 km/h
      Forward gears number 4 and 2 50 % more or 2

      Neutral reasons:

      Sizes

      Height to cab upper part 3250 mm and 3260 mm
      Length with bucket on ground level 7135 mm and 7270 mm
      Wheelbase 2900 mm and 2900 mm
      Hinge axis maximum height 3900 mm and 33830 mm
      Radius at maximum lifting and unloading 970 mm and 970 mm

      Shovel

      Shovel width 2500 mm and 2550 mm

      Operation

      Rear axle oscillating 12 degrees and 24 degrees
      Working weight 12260 kg and 11498.6 kg
      Tyre size 20.5 R 25 and 20.5-25 16 PR, L3
      Operating voltage 24 V and 24 V

      Motor

      Aspiration Engine with in-line cylinders, water-cooled, with release and exhaust gas turbocharger with intermediate air cooling and turbocharging
      Manufacturer Liebherr and Cummins
      Model D 924 TI-E A1 and QSB5.9-C

      Hydraulic system

      Type of pump Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit and open-centered, doubling loop system
      Overflow valve pressure 30000 kPa and 21580.6 kPa

      Gear box

      Transmission type Stepless hydrostatic travel drive system and 3 elements, single-stage, single phase

      Images

      Sizes

      1. Length with bucket on ground level 7135 mm 1. Length with bucket on ground level 7270 mm
      3. Height to cab upper part 3250 mm 3. Height to cab upper part 3260 mm
      4. Wheelbase 2900 mm 4. Wheelbase 2900 mm
      5. Clearance 460 mm 5. Clearance 417 mm
      6. Hinge axis maximum height 3900 mm 6. Hinge axis maximum height 33830 mm
      8. Radius at maximum lifting and unloading 970 mm 8. Radius at maximum lifting and unloading 970 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2870 mm 7. Unloading ground clearance at maximum lifting 2850 mm