- Home/
- Comparison/
- Wheel-Mounted Loader/
- Liebherr L542 2 plus 1 vs. Terex TXL250-2
Liebherr L542 2 plus 1 vs. Terex TXL250-2
10 reasons to buy Liebherr L542 2 plus 1:
Sizes
Clearance | 490 mm and 410 mm | 16 % more or 80 mm |
Shovel
Breakout power | 105 kN and 129 kN | 19 % less or 24 kN |
Unloading ground clearance at maximum lifting | 2845 mm and 2700 mm | 5 % more or 145 mm |
Bucket capacity with top | 2.7 m3 and 2.5 m3 | 7 % more or 0.2 m3 |
Operation
Hydraulic system fluid volume | 180 l. and 158 l. | 12 % more or 22 l. |
Engine oil volume | 29 l. and 27 l. | 7 % more or 2 l. |
Generator current strength | 80 amperes and 70 amperes | 12 % more or 10 amperes |
Motor
Displacement | 6.4 l. and 5.9 l. | 8 % more or 0.5 l. |
Gear box
Maximum forward speed | 40 km/h and 34 km/h | 15 % more or 6 km/h |
Maximum reverse gear | 40 km/h and 23.5 km/h | 41 % more or 16.5 km/h |
14 reasons to buy Terex TXL250-2:
Operation
Fuel Capacity | 255 l. and 170 l. | 33 % more or 85 l. |
Front axle / differential fluid volume | 31 l. and 16.3 l. | 47 % more or 14.7 l. |
Rear axle / differential fluid volume | 24 l. and 15 l. | 37 % more or 9 l. |
Static tipping weight | 12200 kg and 11040 kg | 10 % more or 1160 kg |
Motor
Torque measured at | 1400 rev / min and 1300 rev / min | 7 % more or 100 rev |
Cylinders number | 6 and 4 | 33 % more or 2 |
Maximum torque | 804 Nm and 770 Nm | 4 % more or 34 Nm |
Full power | 121.5 kW and 105 kW | 14 % more or 16.5 kW |
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Hydraulic system
Pump bandwidth | 280.1 l/min and 140 l/min | 50 % more or 140.1 l/min |
Lifting time | 5.4 sec and 5.9 sec | 8 % less or 0.5 sec |
Unloading time | 1.3 sec and 1.6 sec | 19 % less or 0.3 sec |
Lowering time | 3.3 sec and 4 sec | 17 % less or 0.7 sec |
Gear box
Forward gears number | 4 and 3 | 25 % more or 1 |
Neutral reasons:
Sizes
Wheelbase | 2975 mm and 3020 mm |
Hinge axis maximum height | 3930 mm and 3856 mm |
Length with bucket on ground level | 7225 mm and 7694 mm |
Height to cab upper part | 3250 mm and 3260 mm |
Shovel
Shovel width | 2500 mm and 2740 mm |
Operation
Working weight | 13040.8 kg and 14000.1 kg |
Operating voltage | 24 V and 24 V |
Rear axle oscillating | 12 degrees and 22 degrees |
Tyre size | 20.5R25 and 20.5-25-16PR |
Motor
Manufacturer | Liebherr and Doosan |
Aspiration | turbocharging and turbocharging |
Model | D 934 S AG and DL06 |
Hydraulic system
Type of pump | Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit and vane pump with triple section |
Overflow valve pressure | 33000 kPa and 19601.8 kPa |
Gear box
Reverse gears number | 3 and 3 |
Transmission type | hydrostatic and powershift transmission |
Images
Sizes
4. Wheelbase | 2975 mm | 4. Wheelbase | 3020 mm |
5. Clearance | 490 mm | 5. Clearance | 410 mm |
6. Hinge axis maximum height | 3930 mm | 6. Hinge axis maximum height | 3856 mm |
1. Length with bucket on ground level | 7225 mm | 1. Length with bucket on ground level | 7694 mm |
3. Height to cab upper part | 3250 mm | 3. Height to cab upper part | 3260 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 2845 mm | 7. Unloading ground clearance at maximum lifting | 2700 mm |