- Home/
- Comparison/
- Wheel-Mounted Loader/
- Liebherr L554 2 plus 2 vs. Hitachi LX300-7A
Liebherr L554 2 plus 2 vs. Hitachi LX300-7A
10 reasons to buy Liebherr L554 2 plus 2:
Sizes
Clearance | 530 mm and 425 mm | 20 % more or 105 mm |
Shovel
Breakout power | 130 kN and 237 kN | 45 % less or 107 kN |
Operation
Turn radius | 6360 mm and 6780 mm | 6 % less or 420 mm |
Generator current strength | 55 amperes and 50 amperes | 9 % more or 5 amperes |
Motor
Power measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Hydraulic system
Pump bandwidth | 230 l/min and 154 l/min | 33 % more or 76 l/min |
Lifting time | 5.5 sec and 6.8 sec | 19 % less or 1.3 sec |
Lowering time | 2.7 sec and 3.5 sec | 23 % less or 0.8 sec |
Gear box
Maximum forward speed | 40 km/h and 33.5 km/h | 16 % more or 6.5 km/h |
Maximum reverse gear | 40 km/h and 34.5 km/h | 14 % more or 5.5 km/h |
14 reasons to buy Hitachi LX300-7A:
Sizes
Radius at maximum lifting and unloading | 1480 mm and 1070 mm | 28 % more or 410 mm |
Shovel
Unloading ground clearance at maximum lifting | 3130 mm and 3085 mm | 1 % more or 45 mm |
Bucket capacity with top | 5 m3 and 3.5 m3 | 30 % more or 1.5 m3 |
Operation
Fuel Capacity | 450 l. and 260 l. | 42 % more or 190 l. |
Hydraulic system fluid volume | 260 l. and 220 l. | 15 % more or 40 l. |
Engine oil volume | 34 l. and 20.5 l. | 40 % more or 13.5 l. |
Front axle / differential fluid volume | 85 l. and 51 l. | 40 % more or 34 l. |
Rear axle / differential fluid volume | 87 l. and 28 l. | 68 % more or 59 l. |
Static tipping weight | 20640 kg and 13925 kg | 33 % more or 6715 kg |
Motor
Displacement | 15.7 l. and 6.6 l. | 58 % more or 9.1 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Hydraulic system
Unloading time | 1.7 sec and 2.3 sec | 26 % less or 0.6 sec |
Gear box
Reverse gears number | 4 and 3 | 25 % more or 1 |
Forward gears number | 4 and 3 | 25 % more or 1 |
Neutral reasons:
Sizes
Height to cab upper part | 3355 mm and 3750 mm |
Wheelbase | 3150 mm and 3700 mm |
Length with bucket on ground level | 8130 mm and 9430 mm |
Hinge axis maximum height | 4180 mm and 4430 mm |
Shovel
Shovel width | 2700 mm and 3480 mm |
Operation
Working weight | 17300 kg and 29700 kg |
Operating voltage | 24 V and 24 V |
Rear axle oscillating | 26 degrees and 24 degrees |
Tyre size | 23.5 R 25 and 26.5-25-24PR (L3) |
Motor
Manufacturer | Liebherr and Isuzu |
Model | D 924 TI-E A2 and CC-6WG1X |
Aspiration | Engine with in-line cylinders, water-cooled, with release and exhaust gas turbocharger with intermediate air cooling and Turbocharging with intercooler |
Hydraulic system
Type of pump | Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit and gear type pump |
Overflow valve pressure | 33000 kPa and 20600 kPa |
Gear box
Transmission type | Stepless hydrostatic travel drive system 2+2 and Torque converter, powershift of intermediate type with automatic switching, computer-controlled and manual gearbox |
Images
Sizes
8. Radius at maximum lifting and unloading | 1070 mm | 8. Radius at maximum lifting and unloading | 1480 mm |
1. Length with bucket on ground level | 8130 mm | 1. Length with bucket on ground level | 9430 mm |
3. Height to cab upper part | 3355 mm | 3. Height to cab upper part | 3750 mm |
4. Wheelbase | 3150 mm | 4. Wheelbase | 3700 mm |
5. Clearance | 530 mm | 5. Clearance | 425 mm |
6. Hinge axis maximum height | 4180 mm | 6. Hinge axis maximum height | 4430 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 3085 mm | 7. Unloading ground clearance at maximum lifting | 3130 mm |