- Home/
- Comparison/
- Wheel-Mounted Loader/
- Terex TXL300-2 vs. Hyundai HL740-7
Terex TXL300-2 vs. Hyundai HL740-7
15 reasons to buy Terex TXL300-2:
Sizes
Clearance | 470 mm and 417 mm | 11 % more or 53 mm |
Radius at maximum lifting and unloading | 1285 mm and 970 mm | 25 % more or 315 mm |
Shovel
Bucket capacity with top | 3 m3 and 2.1 m3 | 30 % more or 0.9 m3 |
Operation
Fuel Capacity | 330 l. and 228 l. | 31 % more or 102 l. |
Rear axle / differential fluid volume | 30 l. and 21.2 l. | 29 % more or 8.8 l. |
Hydraulic system fluid volume | 210 l. and 165 l. | 21 % more or 45 l. |
Static tipping weight | 14500 kg and 9180.7 kg | 37 % more or 5319.3 kg |
Engine oil volume | 35 l. and 16 l. | 54 % more or 19 l. |
Cooling system fluid volume | 50 l. and 35 l. | 30 % more or 15 l. |
Transmission fluid volume | 48 l. and 24 l. | 50 % more or 24 l. |
Front axle / differential fluid volume | 38 l. and 21.2 l. | 44 % more or 16.8 l. |
Motor
Full power | 161.8 kW and 99.2 kW | 39 % more or 62.6 kW |
Displacement | 7.6 l. and 5.9 l. | 22 % more or 1.7 l. |
Maximum torque | 1029.1 Nm and 588.4 Nm | 43 % more or 440.7 Nm |
Hydraulic system
Pump bandwidth | 280.1 l/min and 177 l/min | 37 % more or 103.1 l/min |
9 reasons to buy Hyundai HL740-7:
Shovel
Breakout power | 116.5 kN and 162 kN | 28 % less or 45.5 kN |
Unloading ground clearance at maximum lifting | 2850 mm and 1285 mm | 55 % more or 1565 mm |
Motor
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Torque measured at | 1500 rev / min and 1300 rev / min | 13 % more or 200 rev |
Hydraulic system
Unloading time | 1.2 sec and 1.9 sec | 37 % less or 0.7 sec |
Lowering time | 2.8 sec and 3.7 sec | 24 % less or 0.9 sec |
Lifting time | 5.5 sec and 5.9 sec | 7 % less or 0.4 sec |
Gear box
Maximum reverse gear | 25.3 km/h and 23.8 km/h | 6 % more or 1.5 km/h |
Maximum forward speed | 38.2 km/h and 34.5 km/h | 10 % more or 3.7 km/h |
Neutral reasons:
Sizes
Length with bucket on ground level | 8150 mm and 7270 mm |
Between tyres width | 2760 mm and 2550 mm |
Height to cab upper part | 3438 mm and 3260 mm |
Wheelbase | 3200 mm and 2900 mm |
Hinge axis maximum height | 4000 mm and 33830 mm |
Shovel
Shovel width | 2920 mm and 2550 mm |
Operation
Operating voltage | 24 V and 24 V |
Generator current strength | 70 amperes and 70 amperes |
Rear axle oscillating | 24 degrees and 24 degrees |
Tyre size | 23.5-25-16PR-L3 and 20.5-25 16 PR, L3 |
Working weight | 17300 kg and 11498.6 kg |
Motor
Manufacturer | Doosan and Cummins |
Model | DL08 and QSB5.9-C |
Aspiration | turbocharging and turbocharging |
Hydraulic system
Type of pump | pumps with twin vanes and open-centered, doubling loop system |
Overflow valve pressure | 19994.8 kPa and 21580.6 kPa |
Gear box
Transmission type | powershift transmission and 3 elements, single-stage, single phase |
Forward gears number | 4 and 4 |
Reverse gears number | 3 and 3 |
Images
Sizes
1. Length with bucket on ground level | 8150 mm | 1. Length with bucket on ground level | 7270 mm |
2. Between tyres width | 2760 mm | 2. Between tyres width | 2550 mm |
3. Height to cab upper part | 3438 mm | 3. Height to cab upper part | 3260 mm |
4. Wheelbase | 3200 mm | 4. Wheelbase | 2900 mm |
5. Clearance | 470 mm | 5. Clearance | 417 mm |
6. Hinge axis maximum height | 4000 mm | 6. Hinge axis maximum height | 33830 mm |
8. Radius at maximum lifting and unloading | 1285 mm | 8. Radius at maximum lifting and unloading | 970 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 1285 mm | 7. Unloading ground clearance at maximum lifting | 2850 mm |