- Home/
- Comparison/
- Wheel-Mounted Loader/
- Terex TXL500-2 vs. Hyundai HL740TM-7
Terex TXL500-2 vs. Hyundai HL740TM-7
16 reasons to buy Terex TXL500-2:
Sizes
Clearance | 510 mm and 417 mm | 18 % more or 93 mm |
Radius at maximum lifting and unloading | 1430 mm and 1275 mm | 11 % more or 155 mm |
Shovel
Unloading ground clearance at maximum lifting | 3120 mm and 2915 mm | 7 % more or 205 mm |
Bucket capacity with top | 4.8 m3 and 2 m3 | 58 % more or 2.8 m3 |
Operation
Fuel Capacity | 476 l. and 228 l. | 52 % more or 248 l. |
Hydraulic system fluid volume | 236 l. and 165 l. | 30 % more or 71 l. |
Engine oil volume | 34 l. and 16 l. | 53 % more or 18 l. |
Cooling system fluid volume | 60 l. and 35 l. | 42 % more or 25 l. |
Transmission fluid volume | 54 l. and 24 l. | 56 % more or 30 l. |
Front axle / differential fluid volume | 50 l. and 21.2 l. | 58 % more or 28.8 l. |
Rear axle / differential fluid volume | 50 l. and 21.2 l. | 58 % more or 28.8 l. |
Static tipping weight | 23000 kg and 7951.5 kg | 65 % more or 15048.5 kg |
Motor
Displacement | 10.8 l. and 5.9 l. | 45 % more or 4.9 l. |
Maximum torque | 1677.1 Nm and 588.4 Nm | 65 % more or 1088.7 Nm |
Full power | 249.8 kW and 99.2 kW | 60 % more or 150.6 kW |
Hydraulic system
Pump bandwidth | 463.7 l/min and 177 l/min | 62 % more or 286.7 l/min |
8 reasons to buy Hyundai HL740TM-7:
Shovel
Breakout power | 104.4 kN and 273 kN | 62 % less or 168.6 kN |
Motor
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Power measured at | 2200 rev / min and 1900 rev / min | 14 % more or 300 rev |
Hydraulic system
Lifting time | 5.5 sec and 6 sec | 8 % less or 0.5 sec |
Unloading time | 1.4 sec and 1.8 sec | 22 % less or 0.4 sec |
Lowering time | 2.8 sec and 4.3 sec | 35 % less or 1.5 sec |
Gear box
Maximum forward speed | 38.2 km/h and 35 km/h | 8 % more or 3.2 km/h |
Maximum reverse gear | 25.3 km/h and 24.4 km/h | 4 % more or 0.9 km/h |
Neutral reasons:
Sizes
Length with bucket on ground level | 9525 mm and 7550 mm |
Height to cab upper part | 3820 mm and 3260 mm |
Wheelbase | 3600 mm and 2900 mm |
Hinge axis maximum height | 4584 mm and 3990 mm |
Shovel
Shovel width | 3400 mm and 2550 mm |
Operation
Tyre size | 29.5-25-22PR (L3) and 20.5-25 16 PR, L3 |
Working weight | 30699.6 kg and 12050 kg |
Operating voltage | 24 V and 24 V |
Generator current strength | 70 amperes and 70 amperes |
Rear axle oscillating | 20 degrees and 24 degrees |
Motor
Aspiration | turbocharging and turbocharging |
Manufacturer | Cummins and Cummins |
Model | QSM11 and QSB5.9-C |
Hydraulic system
Type of pump | two variable displacement piston pumps, axial, with load sensing and open-centered, doubling loop system |
Overflow valve pressure | 25000.4 kPa and 21580.6 kPa |
Gear box
Transmission type | powershift transmission and 3 elements, single-stage, single phase |
Forward gears number | 4 and 4 |
Reverse gears number | 3 and 3 |
Images
Sizes
3. Height to cab upper part | 3820 mm | 3. Height to cab upper part | 3260 mm |
4. Wheelbase | 3600 mm | 4. Wheelbase | 2900 mm |
5. Clearance | 510 mm | 5. Clearance | 417 mm |
6. Hinge axis maximum height | 4584 mm | 6. Hinge axis maximum height | 3990 mm |
8. Radius at maximum lifting and unloading | 1430 mm | 8. Radius at maximum lifting and unloading | 1275 mm |
1. Length with bucket on ground level | 9525 mm | 1. Length with bucket on ground level | 7550 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 3120 mm | 7. Unloading ground clearance at maximum lifting | 2915 mm |