- Home/
- Comparison/
- Wheel-Mounted Loader/
- Zettelmeyer ZL4001B vs. Liebherr L550 2 plus 2
Zettelmeyer ZL4001B vs. Liebherr L550 2 plus 2
18 reasons to buy Zettelmeyer ZL4001B:
Shovel
Unloading ground clearance at maximum lifting | 3070 mm and 2882 mm | 6 % more or 188 mm |
Bucket capacity with top | 4 m3 and 3.2 m3 | 20 % more or 0.8 m3 |
Operation
Fuel Capacity | 420 l. and 300 l. | 29 % more or 120 l. |
Hydraulic system fluid volume | 460 l. and 240 l. | 48 % more or 220 l. |
Transmission fluid volume | 40 l. and 11.5 l. | 71 % more or 28.5 l. |
Front axle / differential fluid volume | 42 l. and 30 l. | 29 % more or 12 l. |
Rear axle / differential fluid volume | 42 l. and 30 l. | 29 % more or 12 l. |
Static tipping weight | 19400 kg and 13205 kg | 32 % more or 6195 kg |
Motor
Torque measured at | 1400 rev / min and 1300 rev / min | 7 % more or 100 rev |
Maximum torque | 1015 Nm and 828 Nm | 18 % more or 187 Nm |
Cylinders number | 10 and 4 | 60 % more or 6 |
Full power | 225.2 kW and 130 kW | 42 % more or 95.2 kW |
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Displacement | 16 l. and 6.4 l. | 60 % more or 9.6 l. |
Hydraulic system
Pump bandwidth | 378 l/min and 290 l/min | 23 % more or 88 l/min |
Unloading time | 1.7 sec and 2.3 sec | 26 % less or 0.6 sec |
Gear box
Reverse gears number | 4 and 3 | 25 % more or 1 |
Forward gears number | 4 and 3 | 25 % more or 1 |
5 reasons to buy Liebherr L550 2 plus 2:
Shovel
Breakout power | 125 kN and 190 kN | 34 % less or 65 kN |
Operation
Engine oil volume | 31 l. and 28 l. | 10 % more or 3 l. |
Generator current strength | 80 amperes and 55 amperes | 31 % more or 25 amperes |
Hydraulic system
Lifting time | 5.5 sec and 6.8 sec | 19 % less or 1.3 sec |
Lowering time | 2.7 sec and 4.6 sec | 41 % less or 1.9 sec |
Neutral reasons:
Sizes
Wheelbase | 3400 mm and 3280 mm |
Hinge axis maximum height | 4390 mm and 3915 mm |
Length with bucket on ground level | 8600 mm and 8220 mm |
Height to cab upper part | 3555 mm and 3365 mm |
Clearance | 530 mm and 530 mm |
Shovel
Shovel width | 3000 mm and 2700 mm |
Operation
Tyre size | 26.5-25PR(L2) and Michelin 23.5R25 |
Working weight | 23800 kg and 16525 kg |
Operating voltage | 24 V and 24 V |
Rear axle oscillating | 24 degrees and 26 degrees |
Motor
Aspiration | direct injection and turbocharging |
Manufacturer | Deutz and Liebherr |
Model | F 10L 413F and D 934 S A6 |
Hydraulic system
Type of pump | Pump with double gear and Axial cam pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit |
Overflow valve pressure | 17995.3 kPa and 33000 kPa |
Gear box
Maximum forward speed | 40 km/h and 40 km/h |
Transmission type | powershift transmission and hydrostatic |
Maximum reverse gear | 40 km/h and 40 km/h |
Images
Sizes
1. Length with bucket on ground level | 8600 mm | 1. Length with bucket on ground level | 8220 mm |
3. Height to cab upper part | 3555 mm | 3. Height to cab upper part | 3365 mm |
4. Wheelbase | 3400 mm | 4. Wheelbase | 3280 mm |
5. Clearance | 530 mm | 5. Clearance | 530 mm |
6. Hinge axis maximum height | 4390 mm | 6. Hinge axis maximum height | 3915 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 3070 mm | 7. Unloading ground clearance at maximum lifting | 2882 mm |