vs.

      Zettelmeyer ZL702C vs. Liebherr L574 2 plus 2

      7 reasons to buy Zettelmeyer ZL702C:

      Shovel

      Breakout power 41 kN and 175 kN 77 % less or 134 kN

      Operation

      Turn radius 4150 mm and 7090 mm 41 % less or 2940 mm
      Generator current strength 60 amperes and 55 amperes 8 % more or 5 amperes

      Motor

      Power measured at 2300 rev / min and 2000 rev / min 13 % more or 300 rev
      Torque measured at 1800 rev / min and 1200 rev / min 33 % more or 600 rev

      Hydraulic system

      Unloading time 1 sec and 2 sec 50 % less or 1 sec
      Lowering time 3 sec and 3.5 sec 14 % less or 0.5 sec

      19 reasons to buy Liebherr L574 2 plus 2:

      Sizes

      Radius at maximum lifting and unloading 1270 mm and 760 mm 40 % more or 510 mm
      Clearance 550 mm and 420 mm 24 % more or 130 mm

      Shovel

      Unloading ground clearance at maximum lifting 3300 mm and 2490 mm 25 % more or 810 mm

      Operation

      Hydraulic system fluid volume 240 l. and 60 l. 75 % more or 180 l.
      Engine oil volume 23.5 l. and 10.5 l. 55 % more or 13.0 l.
      Front axle / differential fluid volume 51 l. and 10 l. 80 % more or 41 l.
      Fuel Capacity 330 l. and 60 l. 82 % more or 270 l.
      Rear axle / differential fluid volume 51 l. and 11 l. 78 % more or 40 l.
      Static tipping weight 18350 kg and 3950 kg 78 % more or 14400 kg

      Motor

      Full power 197.6 kW and 50.7 kW 74 % more or 146.9 kW
      Displacement 10 l. and 2.7 l. 73 % more or 7.3 l.
      Maximum torque 1285 Nm and 219.6 Nm 83 % more or 1065.4 Nm
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Pump bandwidth 290 l/min and 52 l/min 82 % more or 238 l/min
      Lifting time 5.6 sec and 6 sec 7 % less or 0.4 sec

      Gear box

      Maximum forward speed 40 km/h and 20 km/h 50 % more or 20 km/h
      Maximum reverse gear 40 km/h and 20 km/h 50 % more or 20 km/h
      Forward gears number 3 and 2 33 % more or 1
      Reverse gears number 3 and 2 33 % more or 1

      Neutral reasons:

      Sizes

      Hinge axis maximum height 3130 mm and 4565 mm
      Length with bucket on ground level 5020 mm and 8980 mm
      Height to cab upper part 2640 mm and 3540 mm
      Wheelbase 2000 mm and 3450 mm

      Shovel

      Shovel width 1900 mm and 3000 mm

      Operation

      Working weight 4998.6 kg and 24250 kg
      Operating voltage 12 V and 24 V
      Rear axle oscillating 20 degrees and 26 degrees
      Tyre size 405/70 R20 and 26.5 R 25

      Motor

      Aspiration turbo + oil/air cooling and Engine with in-line cylinders, water-cooled, with release and exhaust gas turbocharger with intermediate air cooling
      Model KHD BF 4L 1011 F and D 926 TI-E A2

      Hydraulic system

      Overflow valve pressure 23028.5 kPa and 35000 kPa
      Type of pump gear type pump and Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit

      Gear box

      Transmission type hydrostatic powershift transmission and Stepless hydrostatic travel drive system 2+2

      Images

      Sizes

      1. Length with bucket on ground level 5020 mm 1. Length with bucket on ground level 8980 mm
      3. Height to cab upper part 2640 mm 3. Height to cab upper part 3540 mm
      4. Wheelbase 2000 mm 4. Wheelbase 3450 mm
      5. Clearance 420 mm 5. Clearance 550 mm
      6. Hinge axis maximum height 3130 mm 6. Hinge axis maximum height 4565 mm
      8. Radius at maximum lifting and unloading 760 mm 8. Radius at maximum lifting and unloading 1270 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2490 mm 7. Unloading ground clearance at maximum lifting 3300 mm