- Home/
- Comparison/
- Hydraulic Autocrane/
- Grove AP206 vs. Grove YB4410
Grove AP206 vs. Grove YB4410
8 reasons to buy Grove AP206:
Sizes
Clearance | 376 mm and 205 mm | 45 % more or 171 mm |
Upperstructure rear swing radius | 863 mm and 1073 mm | 20 % less or 210 mm |
Carrying part engine
Power measured at | 3000 rev / min and 2500 rev / min | 17 % more or 500 rev |
Maximum torque | 168 Nm and 73 Nm | 57 % more or 95 Nm |
Torque measured at | 2000 rev / min and 1200 rev / min | 40 % more or 800 rev |
Booms
Minimum height at maximum lifting angle | 2.9 m and 3.3 m | 12 % less or 0.4 m |
Minimum operating radius | 1.2 m and 1.5 m | 20 % less or 0.3 m |
Rotation speed | 2 rev / min and 1.5 rev / min | 25 % more or 0.5 rev |
5 reasons to buy Grove YB4410:
Operation
Haul truck fuel volume | 114 l. and 109.8 l. | 4 % more or 4.2 l. |
Gear box
Maximum forward speed | 24.1 km/h and 24 km/h | 0 % more or 0.1 km/h |
Booms
Max. height at max. lifting angle without boom | 7.3 m and 6.1 m | 16 % more or 1.2 m |
Maximum lifting capacity | 9071.8 kg and 5443.1 kg | 40 % more or 3628.7 kg |
Maximum working radius | 6.7 m and 5.5 m | 18 % more or 1.2 m |
Neutral reasons:
Sizes
Transport height | 2184 mm and 2368 mm |
Transport width | 1879 mm and 2134 mm |
Width with extended supports | 2794 mm and 3302 mm |
Hauler length | 3606 mm and 4374 mm |
Operation
Tyre size | 8.25X15-12PR and 10.00 x 15-16PR |
Operating voltage | 12 V and 12 V |
Working weight | 5023 kg and 7711.1 kg |
Axels number | 2 and 2 |
Gear box
Transmission type | automatic and automatic |
Forward gears number | 3 and 3 |
Reverse gears number | 1 and 1 |
Carrying part engine
Manufacturer | Continental and Cummins |
Model | TMD27 and 4B3.9 L |
Booms
Sections number | 3 and 3 |
Maximum angle of ascent | 70 degrees and 70 degrees |
Images
Sizes
2. Transport width | 1879 mm | 2. Transport width | 2134 mm |
3. Transport height | 2184 mm | 3. Transport height | 2368 mm |
5. Clearance | 376 mm | 5. Clearance | 205 mm |
6. Width with extended supports | 2794 mm | 6. Width with extended supports | 3302 mm |
7. Hauler length | 3606 mm | 7. Hauler length | 4374 mm |
8. Upperstructure rear swing radius | 863 mm | 8. Upperstructure rear swing radius | 1073 mm |
Booms
9. Minimum height at maximum lifting angle | 2.9 m | 9. Minimum height at maximum lifting angle | 3.3 m |
10. Max. height at max. lifting angle without boom | 6.1 m | 10. Max. height at max. lifting angle without boom | 7.3 m |
11. Minimum operating radius | 1.2 m | 11. Minimum operating radius | 1.5 m |
12. Maximum working radius | 5.5 m | 12. Maximum working radius | 6.7 m |
13. Maximum angle of ascent | 70 degrees | 13. Maximum angle of ascent | 70 degrees |