- Home/
- Comparison/
- Hydraulic Autocrane/
- Grove IND1012 vs. Krupp 100GMT
Grove IND1012 vs. Krupp 100GMT
2 reasons to buy Grove IND1012:
Booms
Minimum operating radius | 1.8 m and 3 m | 40 % less or 1.2 m |
Minimum height at maximum lifting angle | 1.8 m and 15.2 m | 88 % less or 13.4 m |
11 reasons to buy Krupp 100GMT:
Operation
Axels number | 5 and 2 | 60 % more or 3 |
Haul truck fuel volume | 567.8 l. and 163 l. | 71 % more or 404.8 l. |
Upper structure hydraulic fluid volume | 1324.9 l. and 227 l. | 83 % more or 1097.9 l. |
Gear box
Forward gears number | 5 and 4 | 20 % more or 1 |
Maximum forward speed | 67.6 km/h and 24.9 km/h | 63 % more or 42.7 km/h |
Carrying part engine
Full power | 313.2 kW and 94.7 kW | 70 % more or 218.5 kW |
Booms
Sections number | 4 and 3 | 25 % more or 1 |
Maximum working radius | 39.6 m and 12.8 m | 68 % more or 26.8 m |
Max. height at max. lifting angle without boom | 45.7 m and 12.8 m | 72 % more or 32.9 m |
Maximum angle of ascent | 82 degrees and 70 degrees | 15 % more or 12 degrees |
Maximum lifting capacity | 109225 kg and 15875.7 kg | 85 % more or 93349.3 kg |
Neutral reasons:
Sizes
Transport length | 8668 mm and 16230.6 mm |
Transport width | 2503 mm and 2996.2 mm |
Transport height | 3121 mm and 3758.2 mm |
Width with extended supports | 4267 mm and 7492 mm |
Hauler length | 5969 mm and 12902.2 mm |
Operation
Working weight | 25446.5 kg and 1 kg |
Operating voltage | 12 V and 24 V |
Tyre size | 12x20-16PR and 14.00-24 PR 22 |
Gear box
Transmission type | Fully automatic and Allison 5 automatic gearbox with switching speeds under full load |
Carrying part engine
Manufacturer | G.M. and Daimler Chrysler |
Model | 4-53N and OM 404 |
Power measured at | 2400 rev / min and 2400 rev / min |
Images
Sizes
7. Hauler length | 5969 mm | 7. Hauler length | 12902.2 mm |
1. Transport length | 8668 mm | 1. Transport length | 16230.6 mm |
2. Transport width | 2503 mm | 2. Transport width | 2996.2 mm |
3. Transport height | 3121 mm | 3. Transport height | 3758.2 mm |
6. Width with extended supports | 4267 mm | 6. Width with extended supports | 7492 mm |
Booms
9. Minimum height at maximum lifting angle | 1.8 m | 9. Minimum height at maximum lifting angle | 15.2 m |
10. Max. height at max. lifting angle without boom | 12.8 m | 10. Max. height at max. lifting angle without boom | 45.7 m |
11. Minimum operating radius | 1.8 m | 11. Minimum operating radius | 3 m |
12. Maximum working radius | 12.8 m | 12. Maximum working radius | 39.6 m |
13. Maximum angle of ascent | 70 degrees | 13. Maximum angle of ascent | 82 degrees |