- Home/
- Comparison/
- Hydraulic Autocrane/
- Liebherr LTM1100-4.1 vs. Broderson IC35D
Liebherr LTM1100-4.1 vs. Broderson IC35D
12 reasons to buy Liebherr LTM1100-4.1:
Operation
Axels number | 4 and 2 | 50 % more or 2 |
Haul truck fuel volume | 400 l. and 51.1 l. | 87 % more or 348.9 l. |
Generator current strength | 170 amperes and 35 amperes | 79 % more or 135 amperes |
Gear box
Maximum forward speed | 75 km/h and 16.1 km/h | 79 % more or 58.9 km/h |
Carrying part engine
Full power | 355 kW and 38 kW | 89 % more or 317 kW |
Maximum torque | 3009.9 Nm and 142.4 Nm | 95 % more or 2867.5 Nm |
Booms
Sections number | 6 and 3 | 50 % more or 3 |
Max. height at max. lifting angle without boom | 52 m and 7.9 m | 85 % more or 44.1 m |
Maximum angle of ascent | 82 degrees and 70 degrees | 15 % more or 12 degrees |
Maximum lifting capacity | 100000 kg and 3628.7 kg | 96 % more or 96371.3 kg |
Maximum working radius | 48 m and 8.2 m | 83 % more or 39.8 m |
Rotation speed | 1.8 rev / min and 1.4 rev / min | 22 % more or 0.4 rev |
3 reasons to buy Broderson IC35D:
Sizes
Upperstructure rear swing radius | 1066.8 mm and 4100 mm | 74 % less or 3033.2 mm |
Booms
Minimum height at maximum lifting angle | 4.5 m and 11.5 m | 61 % less or 7.0 m |
Minimum operating radius | 1.2 m and 2.5 m | 52 % less or 1.3 m |
Neutral reasons:
Sizes
Transport length | 13050 mm and 3633.2 mm |
Transport width | 2750 mm and 1524 mm |
Transport height | 3950 mm and 1981.2 mm |
Hauler length | 10525 mm and 3023.6 mm |
Operation
Operating voltage | 24 V and 12 V |
Tyre size | 14 R25 and 7.5x10 |
Carrying part engine
Manufacturer | Liebherr and Nissan |
Model | D846 A7 and H20 |
Images
Sizes
1. Transport length | 13050 mm | 1. Transport length | 3633.2 mm |
2. Transport width | 2750 mm | 2. Transport width | 1524 mm |
3. Transport height | 3950 mm | 3. Transport height | 1981.2 mm |
7. Hauler length | 10525 mm | 7. Hauler length | 3023.6 mm |
8. Upperstructure rear swing radius | 4100 mm | 8. Upperstructure rear swing radius | 1066.8 mm |
Booms
9. Minimum height at maximum lifting angle | 11.5 m | 9. Minimum height at maximum lifting angle | 4.5 m |
10. Max. height at max. lifting angle without boom | 52 m | 10. Max. height at max. lifting angle without boom | 7.9 m |
11. Minimum operating radius | 2.5 m | 11. Minimum operating radius | 1.2 m |
12. Maximum working radius | 48 m | 12. Maximum working radius | 8.2 m |
13. Maximum angle of ascent | 82 degrees | 13. Maximum angle of ascent | 70 degrees |