- Home/
- Comparison/
- Hydraulic Autocrane/
- Shuttlelift 5560B vs. Kato NK400E-III
Shuttlelift 5560B vs. Kato NK400E-III
5 reasons to buy Shuttlelift 5560B:
Sizes
Upperstructure rear swing radius | 1830 mm and 3520 mm | 48 % less or 1690 mm |
Gear box
Reverse gears number | 4 and 2 | 50 % more or 2 |
Booms
Minimum operating radius | 1.8 m and 3 m | 40 % less or 1.2 m |
Rotation speed | 2.5 rev / min and 2.3 rev / min | 8 % more or 0.2 rev |
Minimum height at maximum lifting angle | 5.6 m and 14 m | 60 % less or 8.4 m |
10 reasons to buy Kato NK400E-III:
Operation
Haul truck fuel volume | 300 l. and 151.4 l. | 50 % more or 148.6 l. |
Gear box
Maximum forward speed | 75 km/h and 33.8 km/h | 55 % more or 41.2 km/h |
Forward gears number | 10 and 4 | 60 % more or 6 |
Carrying part engine
Full power | 213 kW and 74 kW | 65 % more or 139 kW |
Displacement | 14.9 l. and 4.5 l. | 70 % more or 10.4 l. |
Booms
Max. height at max. lifting angle without boom | 38 m and 16.6 m | 56 % more or 21.4 m |
Maximum angle of ascent | 81 degrees and 80 degrees | 1 % more or 1 degrees |
Maximum lifting capacity | 40000 kg and 16329.3 kg | 59 % more or 23670.7 kg |
Maximum working radius | 30 m and 15.5 m | 48 % more or 14.5 m |
Sections number | 5 and 4 | 20 % more or 1 |
Neutral reasons:
Sizes
Transport width | 2380 mm and 2750 mm |
Transport height | 2410 mm and 3750 mm |
Width with extended supports | 4220 mm and 6600 mm |
Transport length | 6910 mm and 13450 mm |
Operation
Operating voltage | 12 V and 24 V |
Working weight | 13925.3 kg and 35800 kg |
Tyre size | 385/65R22.5 and 11.00-20-16PR |
Gear box
Transmission type | powershift and Combined full mesh and synchronizer |
Carrying part engine
Model | QSB4.5L and 8DC8-2A |
Manufacturer | Cummins and Mitsubishi |
Images
Sizes
1. Transport length | 6910 mm | 1. Transport length | 13450 mm |
2. Transport width | 2380 mm | 2. Transport width | 2750 mm |
3. Transport height | 2410 mm | 3. Transport height | 3750 mm |
6. Width with extended supports | 4220 mm | 6. Width with extended supports | 6600 mm |
8. Upperstructure rear swing radius | 1830 mm | 8. Upperstructure rear swing radius | 3520 mm |
Booms
11. Minimum operating radius | 1.8 m | 11. Minimum operating radius | 3 m |
12. Maximum working radius | 15.5 m | 12. Maximum working radius | 30 m |
13. Maximum angle of ascent | 80 degrees | 13. Maximum angle of ascent | 81 degrees |
9. Minimum height at maximum lifting angle | 5.6 m | 9. Minimum height at maximum lifting angle | 14 m |
10. Max. height at max. lifting angle without boom | 16.6 m | 10. Max. height at max. lifting angle without boom | 38 m |