- Home/
- Comparison/
- All Terrain Crane/
- Terex RC45 vs. Broderson IC80-1G
Terex RC45 vs. Broderson IC80-1G
12 reasons to buy Terex RC45:
Sizes
Clearance | 360 mm and 176.8 mm | 51 % more or 183.2 mm |
Operation
Fuel Capacity | 300 l. and 75.7 l. | 75 % more or 224.3 l. |
Generator current strength | 70 amperes and 66 amperes | 6 % more or 4 amperes |
Motor
Maximum torque | 732 Nm and 221 Nm | 70 % more or 511 Nm |
Displacement | 6.7 l. and 3 l. | 55 % more or 3.7 l. |
Gear box
Maximum forward speed | 34 km/h and 32.2 km/h | 5 % more or 1.8 km/h |
Reverse gears number | 6 and 4 | 33 % more or 2 |
Forward gears number | 6 and 4 | 33 % more or 2 |
Booms
Sections number | 6 and 3 | 50 % more or 3 |
Max. height at max. lifting angle without boom | 37.4 m and 8.6 m | 77 % more or 28.8 m |
Maximum angle of ascent | 78 degrees and 70 degrees | 10 % more or 8 degrees |
Maximum lifting capacity | 44000 kg and 8164.7 kg | 81 % more or 35835.3 kg |
4 reasons to buy Broderson IC80-1G:
Sizes
Upperstructure rear swing radius | 1447.8 mm and 3830 mm | 62 % less or 2382.2 mm |
Booms
Minimum height at maximum lifting angle | 5.2 m and 9.5 m | 45 % less or 4.3 m |
Minimum operating radius | 1.5 m and 2.5 m | 40 % less or 1.0 m |
Maximum working radius | 6.1 m and 32 m | 81 % less or 25.9 m |
Neutral reasons:
Sizes
Chassis/base length | 6680 mm and 3904.5 mm |
Transport length | 11245 mm and 4081.3 mm |
Transport width | 2550 mm and 1981.2 mm |
Transport height | 3390 mm and 2209.8 mm |
Wheelbase | 3620 mm and 2185.4 mm |
Width with extended supports | 5830 mm and 2920 mm |
Operation
Operating voltage | 24 V and 12 V |
Tyre size | 16R25 and 10.00x15 |
Motor
Model | QSB6.7 and GM 3.0 EFI |
Gear box
Transmission type | DANA lot 20000 and powershift |
Images
Sizes
1. Transport length | 11245 mm | 1. Transport length | 4081.3 mm |
2. Transport width | 2550 mm | 2. Transport width | 1981.2 mm |
3. Transport height | 3390 mm | 3. Transport height | 2209.8 mm |
4. Wheelbase | 3620 mm | 4. Wheelbase | 2185.4 mm |
5. Clearance | 360 mm | 5. Clearance | 176.8 mm |
6. Width with extended supports | 5830 mm | 6. Width with extended supports | 2920 mm |
7. Chassis/base length | 6680 mm | 7. Chassis/base length | 3904.5 mm |
8. Upperstructure rear swing radius | 3830 mm | 8. Upperstructure rear swing radius | 1447.8 mm |
Booms
9. Minimum height at maximum lifting angle | 9.5 m | 9. Minimum height at maximum lifting angle | 5.2 m |
10. Max. height at max. lifting angle without boom | 37.4 m | 10. Max. height at max. lifting angle without boom | 8.6 m |
11. Minimum operating radius | 2.5 m | 11. Minimum operating radius | 1.5 m |
12. Maximum working radius | 32 m | 12. Maximum working radius | 6.1 m |
13. Maximum angle of ascent | 78 degrees | 13. Maximum angle of ascent | 70 degrees |