- Home/
- Comparison/
- Self-Powered Crane/
- Kato 4100 vs. Krupp KMK4080
Kato 4100 vs. Krupp KMK4080
8 reasons to buy Kato 4100:
Sizes
Upperstructure rear swing radius | 2600 mm and 3505.2 mm | 26 % less or 905.2 mm |
Operation
Haul truck fuel volume | 400 l. and 378.5 l. | 5 % more or 21.5 l. |
Generator current strength | 80 amperes and 55 amperes | 31 % more or 25 amperes |
Gear box
Forward gears number | 6 and 5 | 17 % more or 1 |
Carrying part engine
Full power | 309 kW and 270 kW | 13 % more or 39 kW |
Maximum torque | 1850 Nm and 1600 Nm | 14 % more or 250 Nm |
Booms
Sections number | 7 and 3 | 57 % more or 4 |
Minimum height at maximum lifting angle | 11.8 m and 14.6 m | 19 % less or 2.8 m |
4 reasons to buy Krupp KMK4080:
Carrying part engine
Power measured at | 2100 rev / min and 1800 rev / min | 14 % more or 300 rev |
Torque measured at | 1500 rev / min and 1200 rev / min | 20 % more or 300 rev |
Booms
Max. height at max. lifting angle without boom | 40.8 m and 18 m | 56 % more or 22.8 m |
Maximum angle of ascent | 84 degrees and 83 degrees | 1 % more or 1 degrees |
Neutral reasons:
Sizes
Hauler length | 11430 mm and 10613.1 mm |
Transport length | 13250 mm and 13258.8 mm |
Transport width | 2750 mm and 2743.2 mm |
Transport height | 3930 mm and 4014.2 mm |
Width with extended supports | 7400 mm and 7187.2 mm |
Operation
Axels number | 4 and 4 |
Operating voltage | 24 V and 24 V |
Tyre size | 445/95 R25 177E and 14.00R25 |
Gear box
Reverse gears number | 1 and 1 |
Transmission type | automatic and ZF 5-special-automatic 5 HP 600 |
Carrying part engine
Manufacturer | Volvo and Mercedes-Benz |
Model | D12A 420 (Euro 2) and OM 442 diesel |
Images
Sizes
1. Transport length | 13250 mm | 1. Transport length | 13258.8 mm |
2. Transport width | 2750 mm | 2. Transport width | 2743.2 mm |
3. Transport height | 3930 mm | 3. Transport height | 4014.2 mm |
6. Width with extended supports | 7400 mm | 6. Width with extended supports | 7187.2 mm |
7. Hauler length | 11430 mm | 7. Hauler length | 10613.1 mm |
8. Upperstructure rear swing radius | 2600 mm | 8. Upperstructure rear swing radius | 3505.2 mm |
Booms
13. Maximum angle of ascent | 83 degrees | 13. Maximum angle of ascent | 84 degrees |
9. Minimum height at maximum lifting angle | 11.8 m | 9. Minimum height at maximum lifting angle | 14.6 m |
10. Max. height at max. lifting angle without boom | 18 m | 10. Max. height at max. lifting angle without boom | 40.8 m |