- Home/
- Comparison/
- Self-Powered Crane/
- Krupp KMK3045 vs. Liebherr LTM1220-5.2
Krupp KMK3045 vs. Liebherr LTM1220-5.2
3 reasons to buy Krupp KMK3045:
Sizes
Upperstructure rear swing radius | 3252.2 mm and 3973 mm | 18 % less or 720.8 mm |
Gear box
Maximum reverse gear | 17.5 km/h and 7.2 km/h | 59 % more or 10.3 km/h |
Booms
Maximum angle of ascent | 84 degrees and 82 degrees | 2 % more or 2 degrees |
11 reasons to buy Liebherr LTM1220-5.2:
Operation
Axels number | 5 and 3 | 40 % more or 2 |
Haul truck fuel volume | 490 l. and 302.8 l. | 38 % more or 187.2 l. |
Generator current strength | 170 amperes and 55 amperes | 68 % more or 115 amperes |
Gear box
Maximum forward speed | 75 km/h and 67.6 km/h | 10 % more or 7.4 km/h |
Forward gears number | 12 and 6 | 50 % more or 6 |
Carrying part engine
Maximum torque | 3193 Nm and 1100 Nm | 66 % more or 2093 Nm |
Booms
Sections number | 6 and 3 | 50 % more or 3 |
Minimum height at maximum lifting angle | 13.3 m and 13.4 m | 1 % less or 0.1 m |
Max. height at max. lifting angle without boom | 60 m and 34.1 m | 43 % more or 25.9 m |
Maximum lifting capacity | 220000 kg and 40823.3 kg | 81 % more or 179176.7 kg |
Maximum working radius | 66 m and 32 m | 52 % more or 34 m |
Neutral reasons:
Sizes
Hauler length | 8738.6 mm and 13298 mm |
Transport length | 11302 mm and 15323 mm |
Transport width | 2490.2 mm and 5500 mm |
Transport height | 3605.8 mm and 3950 mm |
Operation
Tyre size | 14.00R25 and 14R25 |
Operating voltage | 24 V and 24 V |
Gear box
Reverse gears number | 2 and 2 |
Transmission type | ZF 6-powershift 6 WG 200 and ZF 12-speed gearbox with automatic control system AS-TRONIC |
Carrying part engine
Manufacturer | Mercedes-Benz and Liebherr |
Model | OM 422 diesel and D846 A7 |
Booms
Minimum operating radius | 3 m and 3 m |
Images
Sizes
1. Transport length | 11302 mm | 1. Transport length | 15323 mm |
2. Transport width | 2490.2 mm | 2. Transport width | 5500 mm |
3. Transport height | 3605.8 mm | 3. Transport height | 3950 mm |
7. Hauler length | 8738.6 mm | 7. Hauler length | 13298 mm |
8. Upperstructure rear swing radius | 3252.2 mm | 8. Upperstructure rear swing radius | 3973 mm |
Booms
9. Minimum height at maximum lifting angle | 13.4 m | 9. Minimum height at maximum lifting angle | 13.3 m |
10. Max. height at max. lifting angle without boom | 34.1 m | 10. Max. height at max. lifting angle without boom | 60 m |
11. Minimum operating radius | 3 m | 11. Minimum operating radius | 3 m |
12. Maximum working radius | 32 m | 12. Maximum working radius | 66 m |
13. Maximum angle of ascent | 84 degrees | 13. Maximum angle of ascent | 82 degrees |