- Home/
- Comparison/
- Self-Powered Crane/
- Tadano ATF45-3 vs. Terex AC70
Tadano ATF45-3 vs. Terex AC70
4 reasons to buy Tadano ATF45-3:
Operation
Generator current strength | 100 amperes and 80 amperes | 20 % more or 20 amperes |
Booms
Rotation speed | 2.5 rev / min and 1.6 rev / min | 36 % more or 0.9 rev |
Maximum angle of ascent | 80 degrees and 78 degrees | 2 % more or 2 degrees |
Minimum operating radius | 2.7 m and 3 m | 10 % less or 0.3 m |
9 reasons to buy Terex AC70:
Sizes
Upperstructure rear swing radius | 3650 mm and 3770 mm | 3 % less or 120 mm |
Operation
Axels number | 4 and 3 | 25 % more or 1 |
Haul truck fuel volume | 400 l. and 300 l. | 25 % more or 100 l. |
Gear box
Forward gears number | 16 and 12 | 25 % more or 4 |
Carrying part engine
Full power | 298.3 kW and 243.1 kW | 19 % more or 55.2 kW |
Maximum torque | 1850 Nm and 1300 Nm | 30 % more or 550 Nm |
Booms
Maximum working radius | 42 m and 30.5 m | 27 % more or 11.5 m |
Sections number | 8 and 5 | 37 % more or 3 |
Maximum lifting capacity | 70000 kg and 45359.2 kg | 35 % more or 24640.8 kg |
Neutral reasons:
Sizes
Transport length | 10440 mm and 9963 mm |
Transport width | 2820 mm and 2550 mm |
Transport height | 3620 mm and 3830 mm |
Width with extended supports | 6300 mm and 6550 mm |
Hauler length | 9190 mm and 8248 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 20.5R25 and 14.00R25 |
Gear box
Transmission type | ZF AS-Tronic kind 12AS2302 and DaimlerChrysler gearshift pattern G 210-16 |
Reverse gears number | 2 and 2 |
Maximum forward speed | 80 km/h and 80 km/h |
Carrying part engine
Manufacturer | Mercedes-Benz and Daimler Chrysler |
Model | OM 926 LA and OM 457 LA |
Torque measured at | 1200 rev / min and 1200 rev / min |
Images
Sizes
1. Transport length | 10440 mm | 1. Transport length | 9963 mm |
2. Transport width | 2820 mm | 2. Transport width | 2550 mm |
3. Transport height | 3620 mm | 3. Transport height | 3830 mm |
6. Width with extended supports | 6300 mm | 6. Width with extended supports | 6550 mm |
7. Hauler length | 9190 mm | 7. Hauler length | 8248 mm |
8. Upperstructure rear swing radius | 3770 mm | 8. Upperstructure rear swing radius | 3650 mm |
Booms
11. Minimum operating radius | 2.7 m | 11. Minimum operating radius | 3 m |
12. Maximum working radius | 30.5 m | 12. Maximum working radius | 42 m |
13. Maximum angle of ascent | 80 degrees | 13. Maximum angle of ascent | 78 degrees |