- Home/
- Comparison/
- Felling-and-Bunching Machine/
- Madill T2200B vs. John Deere 909J
Madill T2200B vs. John Deere 909J
6 reasons to buy Madill T2200B:
Operation
Maximum speed | 5.1 km/h and 4 km/h | 22 % more or 1.1 km/h |
Engine oil volume | 242.3 l. and 28 l. | 88 % more or 214.3 l. |
Motor
Full power | 227.4 kW and 219.2 kW | 4 % more or 8.2 kW |
Power measured at | 2200 rev / min and 1900 rev / min | 14 % more or 300 rev |
Displacement | 9 l. and 8.1 l. | 10 % more or 0.9 l. |
Carrier
Traction force | 34291.6 kg and 33701.9 kg | 2 % more or 589.7 kg |
5 reasons to buy John Deere 909J:
Sizes
Clearance | 770 mm and 661.4 mm | 14 % more or 108.6 mm |
Maximum radius | 8400 mm and 8177.8 mm | 3 % more or 222.2 mm |
Operation
Generator current strength | 80 amperes and 70 amperes | 12 % more or 10 amperes |
Fuel Capacity | 1116.7 l. and 946.4 l. | 15 % more or 170.3 l. |
Carrier
Rolling bearings number on either side | 10 and 8 Berco track chain roller on each side | 20 % more or 2 |
Neutral reasons:
Sizes
Overall width | 3252.2 mm and 3330 mm |
Height to cab upper part | 3810 mm and 4000 mm |
Rear platform swing radius | 2795 mm and 3000 mm |
Operation
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Cummins and John Deere |
Model | QSL and 6081H |
Gear box
Forward gears number | 2 and 2 |
Carrier
Shoe dimensions | 609.6 mm and 609.6 mm |
Booms
Pin lifting at maximum radius | 9888.3 kg and 6432 kg |
Alignment device
Front end | 27 degrees and 7 degrees |
Rear | 3 degrees and 26 degrees |
Images
Sizes
2. Overall width | 3252.2 mm | 2. Overall width | 3330 mm |
3. Height to cab upper part | 3810 mm | 3. Height to cab upper part | 4000 mm |
5. Clearance | 661.4 mm | 5. Clearance | 770 mm |
8. Rear platform swing radius | 2795 mm | 8. Rear platform swing radius | 3000 mm |
Carrier
7. Shoe dimensions | 609.6 mm | 7. Shoe dimensions | 609.6 mm |