- Home/
- Comparison/
- Felling-and-Bunching Machine/
- Madill T2250C vs. John Deere 903J
Madill T2250C vs. John Deere 903J
8 reasons to buy Madill T2250C:
Sizes
Maximum radius | 8793.5 mm and 8400 mm | 4 % more or 393.5 mm |
Operation
Engine oil volume | 219.6 l. and 28 l. | 87 % more or 191.6 l. |
Generator current strength | 100 amperes and 80 amperes | 20 % more or 20 amperes |
Maximum speed | 4.5 km/h and 4 km/h | 11 % more or 0.5 km/h |
Motor
Power measured at | 2000 rev / min and 1900 rev / min | 5 % more or 100 rev |
Displacement | 8.9 l. and 8.1 l. | 9 % more or 0.8 l. |
Full power | 227.4 kW and 219.2 kW | 4 % more or 8.2 kW |
Carrier
Traction force | 40369.7 kg and 33701.9 kg | 17 % more or 6667.8 kg |
3 reasons to buy John Deere 903J:
Sizes
Clearance | 749 mm and 737.6 mm | 2 % more or 11.4 mm |
Operation
Fuel Capacity | 1116.7 l. and 1097.8 l. | 2 % more or 18.9 l. |
Specific ground pressure | 64.1 kPa and 67.6 kPa | 5 % less or 3.5 kPa |
Neutral reasons:
Sizes
Height to cab upper part | 3910.6 mm and 3860 mm |
Rear platform swing radius | 2895.6 mm and 3000 mm |
Overall width | 3453.4 mm and 3170 mm |
Operation
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Cummins and John Deere |
Model | QSL and 6081H |
Carrier
Shoe dimensions | 711.2 mm and 609.6 mm |
Rolling bearings number on either side | 9 Berco excavator rollers on each side and 9 |
Track width | 3454.4 mm and 2560 mm |
Images
Sizes
8. Rear platform swing radius | 2895.6 mm | 8. Rear platform swing radius | 3000 mm |
2. Overall width | 3453.4 mm | 2. Overall width | 3170 mm |
3. Height to cab upper part | 3910.6 mm | 3. Height to cab upper part | 3860 mm |
5. Clearance | 737.6 mm | 5. Clearance | 749 mm |
Carrier
6. Track width | 3454.4 mm | 6. Track width | 2560 mm |
7. Shoe dimensions | 711.2 mm | 7. Shoe dimensions | 609.6 mm |