vs.

      Tigercat L870C vs. John Deere 959J

      4 reasons to buy Tigercat L870C:

      Operation

      Generator current strength 110 amperes and 80 amperes 27 % more or 30 amperes
      Operational weight without attachment 35640 kg and 36015.2 kg 1 % less or 375.2 kg

      Motor

      Full power 223.7 kW and 219 kW 2 % more or 4.7 kW

      Booms

      Minimum cutting radius 4800 mm and 5180 mm 7 % less or 380 mm

      7 reasons to buy John Deere 959J:

      Sizes

      Clearance 770 mm and 710 mm 8 % more or 60 mm

      Operation

      Hydraulic system fluid volume 311 l. and 190 l. 39 % more or 121 l.
      Fuel Capacity 1117 l. and 970 l. 13 % more or 147 l.

      Motor

      Power measured at 1900 rev / min and 1800 rev / min 5 % more or 100 rev

      Carrier

      Traction force 39145 kg and 33112.2 kg 15 % more or 6032.8 kg
      Rolling bearings number on either side 10 and 9 10 % more or 1

      Booms

      Maximum cutting radius 8530 mm and 8460 mm 1 % more or 70 mm

      Neutral reasons:

      Sizes

      Rear platform swing radius 1420 mm and 3200 mm
      Overall width 3330 mm and 3330 mm
      Height to cab upper part 3710 mm and 4000 mm

      Operation

      Operating voltage 24 V and 24 V

      Motor

      Model QSL9 and 6081H
      Manufacturer Cummins and John Deere

      Carrier

      Shoe dimensions 610 mm and 610 mm
      Caterpillar track pitch 215 mm and 216 mm

      Alignment device

      Front end 20 degrees and 7 degrees
      Rear 7 degrees and 26 degrees
      Lateral part 16 degrees and 14 degrees

      Images

      Sizes

      2. Overall width 3330 mm 2. Overall width 3330 mm
      3. Height to cab upper part 3710 mm 3. Height to cab upper part 4000 mm
      5. Clearance 710 mm 5. Clearance 770 mm
      8. Rear platform swing radius 1420 mm 8. Rear platform swing radius 3200 mm

      Carrier

      7. Shoe dimensions 610 mm 7. Shoe dimensions 610 mm

      Booms

      10. Maximum cutting radius 8460 mm 10. Maximum cutting radius 8530 mm
      9. Minimum cutting radius 4800 mm 9. Minimum cutting radius 5180 mm