- Home/
- Comparison/
- Felling-and-Bunching Machine/
- Tigercat L870C vs. Tigercat LX830C
Tigercat L870C vs. Tigercat LX830C
3 reasons to buy Tigercat L870C:
Operation
Fuel Capacity | 970 l. and 530 l. | 45 % more or 440 l. |
Hydraulic system fluid volume | 190 l. and 165 l. | 13 % more or 25 l. |
Booms
Maximum cutting radius | 8460 mm and 8380 mm | 1 % more or 80 mm |
2 reasons to buy Tigercat LX830C:
Operation
Operational weight without attachment | 32660 kg and 35640 kg | 8 % less or 2980 kg |
Booms
Minimum cutting radius | 3250 mm and 4800 mm | 32 % less or 1550 mm |
Neutral reasons:
Sizes
Height to cab upper part | 3710 mm and 3730 mm |
Clearance | 710 mm and 710 mm |
Overall width | 3330 mm and 3330 mm |
Operation
Operating voltage | 24 V and 24 V |
Generator current strength | 110 amperes and 110 amperes |
Motor
Manufacturer | Cummins and Cummins |
Model | QSL9 and QSL9 |
Full power | 223.7 kW and 223.7 kW |
Power measured at | 1800 rev / min and 1800 rev / min |
Carrier
Caterpillar track pitch | 215 mm and 215 mm |
Shoe dimensions | 610 mm and 610 mm |
Booms
Pin lifting at maximum radius | 6032.8 kg and 4585 kg |
Alignment device
Lateral part | 16 degrees and 22 degrees |
Front end | 20 degrees and 26 degrees |
Rear | 7 degrees and 8 degrees |
Images
Sizes
2. Overall width | 3330 mm | 2. Overall width | 3330 mm |
3. Height to cab upper part | 3710 mm | 3. Height to cab upper part | 3730 mm |
5. Clearance | 710 mm | 5. Clearance | 710 mm |
Carrier
7. Shoe dimensions | 610 mm | 7. Shoe dimensions | 610 mm |
Booms
9. Minimum cutting radius | 4800 mm | 9. Minimum cutting radius | 3250 mm |
10. Maximum cutting radius | 8460 mm | 10. Maximum cutting radius | 8380 mm |