- Home/
- Comparison/
- Skidding Tractor (Skidder)/
- John Deere 548G serie II vs. Caterpillar 525
John Deere 548G serie II vs. Caterpillar 525
5 reasons to buy John Deere 548G serie II:
Sizes
Maximum line speed | 40 m/min and 29.3 m/min | 27 % more or 10.7 m/min |
Maximum traction force on a rope with empty drum | 180 kN and 88.1 kN | 51 % more or 91.9 kN |
Motor
Cylinders number | 6 and 4 | 33 % more or 2 |
Gear box
Forward gears number | 8 and 4 | 50 % more or 4 |
Reverse gears number | 7 and 3 | 57 % more or 4 |
15 reasons to buy Caterpillar 525:
Sizes
Clearance | 527 mm and 514 mm | 2 % more or 13 mm |
Grapple radius on ground level | 2517.1 mm and 1970 mm | 22 % more or 547.1 mm |
Operation
Front differential fluid volume | 42 l. and 17 l. | 60 % more or 25 l. |
Rear differential fluid volume | 42 l. and 17 l. | 60 % more or 25 l. |
Transmission fluid volume | 53 l. and 29.3 l. | 45 % more or 23.7 l. |
Hydraulic system fluid volume | 74 l. and 30.3 l. | 59 % more or 43.7 l. |
Generator current strength | 75 amperes and 65 amperes | 13 % more or 10 amperes |
Fuel Capacity | 265 l. and 189 l. | 29 % more or 76 l. |
Cooling system fluid volume | 36 l. and 24.6 l. | 32 % more or 11.4 l. |
Engine oil volume | 19 l. and 18.9 l. | 1 % more or 0.1 l. |
Motor
Displacement | 7 l. and 6.8 l. | 3 % more or 0.2 l. |
Full power | 130.5 kW and 95 kW | 27 % more or 35.5 kW |
Effective power | 119.3 kW and 89 kW | 25 % more or 30.3 kW |
Gear box
Maximum forward speed | 27.2 km/h and 19.5 km/h | 28 % more or 7.7 km/h |
Maximum reverse gear | 19.2 km/h and 14.7 km/h | 23 % more or 4.5 km/h |
Neutral reasons:
Sizes
Overall width | 3000 mm and 3130 mm |
Height to cab upper part | 3010 mm and 3050 mm |
Wheelbase | 2920 mm and 3500 mm |
Dimensional length | 6330 mm and 6000 mm |
Tong opening at tips | 2160 mm and 2540 mm |
Roller diameter | 203.2 mm and 254 mm |
Operation
Operating voltage | 12 V and 24 V |
Working weight | 9861 kg and 15200 kg |
Axle oscillating | 30 degrees and 15 degrees |
Tyre size | 28L-26 and 23.1-26 |
Motor
Manufacturer | John Deere and Caterpillar |
Power measured at | 2200 rev / min and 2200 rev / min |
Model | 6068T and 3304 DIT |
Aspiration | turbocharging and turbocharging |
Images
Sizes
2. Overall width | 3000 mm | 2. Overall width | 3130 mm |
3. Height to cab upper part | 3010 mm | 3. Height to cab upper part | 3050 mm |
4. Wheelbase | 2920 mm | 4. Wheelbase | 3500 mm |
5. Clearance | 514 mm | 5. Clearance | 527 mm |
8. Grapple radius on ground level | 1970 mm | 8. Grapple radius on ground level | 2517.1 mm |
9. Tong opening at tips | 2160 mm | 9. Tong opening at tips | 2540 mm |
1. Dimensional length | 6330 mm | 1. Dimensional length | 6000 mm |