- Home/
- Comparison/
- Skidding Tractor (Skidder)/
- John Deere 748G serie II vs. Caterpillar 525
John Deere 748G serie II vs. Caterpillar 525
12 reasons to buy John Deere 748G serie II:
Sizes
Maximum line speed | 44.2 m/min and 29.3 m/min | 34 % more or 14.9 m/min |
Maximum traction force on a rope with empty drum | 208.4 kN and 88.1 kN | 58 % more or 120.3 kN |
Clearance | 599 mm and 527 mm | 12 % more or 72 mm |
Operation
Generator current strength | 135 amperes and 75 amperes | 44 % more or 60 amperes |
Fuel Capacity | 273 l. and 265 l. | 3 % more or 8 l. |
Engine oil volume | 23.7 l. and 19 l. | 20 % more or 4.7 l. |
Motor
Full power | 132 kW and 130.5 kW | 1 % more or 1.5 kW |
Effective power | 126 kW and 119.3 kW | 5 % more or 6.7 kW |
Displacement | 8.1 l. and 7 l. | 14 % more or 1.1 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Gear box
Forward gears number | 8 and 4 | 50 % more or 4 |
Reverse gears number | 7 and 3 | 57 % more or 4 |
8 reasons to buy Caterpillar 525:
Sizes
Grapple radius on ground level | 2517.1 mm and 1547 mm | 39 % more or 970.1 mm |
Operation
Transmission fluid volume | 53 l. and 29.3 l. | 45 % more or 23.7 l. |
Hydraulic system fluid volume | 74 l. and 41.6 l. | 44 % more or 32.4 l. |
Cooling system fluid volume | 36 l. and 28.4 l. | 21 % more or 7.6 l. |
Front differential fluid volume | 42 l. and 28.4 l. | 32 % more or 13.6 l. |
Rear differential fluid volume | 42 l. and 28.4 l. | 32 % more or 13.6 l. |
Gear box
Maximum forward speed | 27.2 km/h and 22.8 km/h | 16 % more or 4.4 km/h |
Maximum reverse gear | 19.2 km/h and 17.1 km/h | 11 % more or 2.1 km/h |
Neutral reasons:
Sizes
Height to cab upper part | 3130 mm and 3050 mm |
Roller diameter | 279.4 mm and 254 mm |
Wheelbase | 3680 mm and 3500 mm |
Dimensional length | 7763 mm and 6000 mm |
Overall width | 3230 mm and 3130 mm |
Tong opening at tips | 3124 mm and 2540 mm |
Operation
Axle oscillating | 30 degrees and 15 degrees |
Operating voltage | 12 V and 24 V |
Tyre size | 30.5-32 and 23.1-26 |
Working weight | 14719 kg and 15200 kg |
Motor
Model | 6081T and 3304 DIT |
Power measured at | 2200 rev / min and 2200 rev / min |
Manufacturer | John Deere and Caterpillar |
Aspiration | turbocharging and turbocharging |
Images
Sizes
3. Height to cab upper part | 3130 mm | 3. Height to cab upper part | 3050 mm |
4. Wheelbase | 3680 mm | 4. Wheelbase | 3500 mm |
5. Clearance | 599 mm | 5. Clearance | 527 mm |
8. Grapple radius on ground level | 1547 mm | 8. Grapple radius on ground level | 2517.1 mm |
9. Tong opening at tips | 3124 mm | 9. Tong opening at tips | 2540 mm |
1. Dimensional length | 7763 mm | 1. Dimensional length | 6000 mm |
2. Overall width | 3230 mm | 2. Overall width | 3130 mm |