- Home/
- Comparison/
- Skidding Tractor (Skidder)/
- John Deere 848H vs. Tigercat C640C
John Deere 848H vs. Tigercat C640C
6 reasons to buy John Deere 848H:
Sizes
Blade width | 2946 mm and 2160 mm | 27 % more or 786 mm |
Operation
Generator current strength | 120 amperes and 80 amperes | 33 % more or 40 amperes |
Gear box
Forward gears number | 6 and 1 | 83 % more or 5 |
Reverse gears number | 3 and 1 | 67 % more or 2 |
Maximum forward speed | 20.9 km/h and 13.7 km/h | 34 % more or 7.2 km/h |
Maximum reverse gear | 15.3 km/h and 13.7 km/h | 10 % more or 1.6 km/h |
5 reasons to buy Tigercat C640C:
Sizes
Clearance | 635 mm and 615 mm | 3 % more or 20 mm |
Grapple load capacity - tongs tip to tip | 3 m2 and 1.5 m2 | 50 % more or 1.5 m2 |
Operation
Fuel Capacity | 380 l. and 329.3 l. | 13 % more or 50.7 l. |
Hydraulic system fluid volume | 105 l. and 56.8 l. | 46 % more or 48.2 l. |
Motor
Full power | 186.4 kW and 149 kW | 20 % more or 37.4 kW |
Neutral reasons:
Sizes
Wheelbase | 3785 mm and 6325 mm |
Dimensional length | 8072 mm and 10290 mm |
Overall width | 3560 mm and 3020 mm |
Height to cab upper part | 3127 mm and 3150 mm |
Operation
Axle oscillating | 30 degrees and 15 degrees |
Tyre size | 30.5-32 and Front 30.5 x 32, Rear 28L x 26 |
Working weight | 17826.2 kg and 20850 kg |
Operating voltage | 12 V and 24 V |
Motor
Manufacturer | John Deere and Cummins |
Model | 6068H and QSC8.3 3 level |
Power measured at | 2200 rev / min and 2200 rev / min |
Hydraulic system
Type of pump | variable displacement axial piston pump and axial piston pumps with variable displacement |
Gear box
Transmission type | powershift and single-speed mechanical, hydrostatic with variable speed |
Images
Sizes
1. Dimensional length | 8072 mm | 1. Dimensional length | 10290 mm |
2. Overall width | 3560 mm | 2. Overall width | 3020 mm |
3. Height to cab upper part | 3127 mm | 3. Height to cab upper part | 3150 mm |
4. Wheelbase | 3785 mm | 4. Wheelbase | 6325 mm |
5. Clearance | 615 mm | 5. Clearance | 635 mm |