- Home/
- Comparison/
- Tracked Tractor/
- Komatsu D375A-5 vs. Caterpillar D10T
Komatsu D375A-5 vs. Caterpillar D10T
4 reasons to buy Komatsu D375A-5:
Operation
Engine oil volume | 86 l. and 68 l. | 21 % more or 18 l. |
Final drive fluid volume | 65 l. and 23 l. | 65 % more or 42 l. |
Hydraulic system
Pump bandwidth | 405 l/min and 404 l/min | 0 % more or 1 l/min |
Carrier
Contact with ground area | 4.9 m2 and 4.7 m2 | 4 % more or 0.2 m2 |
10 reasons to buy Caterpillar D10T:
Sizes
Clearance | 615 mm and 610 mm | 1 % more or 5 mm |
Operation
Cooling system fluid volume | 132 l. and 120 l. | 9 % more or 12 l. |
Hydraulic system fluid volume | 144 l. and 138 l. | 4 % more or 6 l. |
Fuel Capacity | 1204 l. and 1050 l. | 13 % more or 154 l. |
Motor
Full power | 482 kW and 451 kW | 6 % more or 31 kW |
Effective power | 433 kW and 391 kW | 10 % more or 42 kW |
Displacement | 27 l. and 23.1 l. | 14 % more or 3.9 l. |
Cylinders number | 12 and 6 | 50 % more or 6 |
Gear box
Maximum forward speed | 12.7 km/h and 11.8 km/h | 7 % more or 0.9 km/h |
Carrier
Track shoes number per side | 44 and 41 | 7 % more or 3 |
Neutral reasons:
Standard blade
Height | 2265 mm and 2120 mm |
Width | 4695 mm and 4860 mm |
Sizes
Length with blade | 10410 mm and 9260 mm |
Width between caterpillar tracks | 2500 mm and 3160 mm |
Height to cab upper part | 4285 mm and 4078 mm |
Operation
Working weight | 69560 kg and 66451 kg |
Motor
Manufacturer | Komatsu and Caterpillar |
Model | SA6D170E-3 and C27 ACERT |
Power measured at | 1800 rev / min and 1800 rev / min |
Aspiration | Turbocharged engine with subsequent cooling of charging air by oncoming air flow, Exhaust gas recirculation system with cooling and turbocharging |
Hydraulic system
Overflow valve pressure | 20615.3 kPa and 18790 kPa |
Gear box
Transmission type | Komatsu TORQFLOW transmission and powershift transmission |
Forward gears number | 3 and 3 |
Reverse gears number | 3 and 3 |
Maximum reverse gear | 15.8 km/h and 15.8 km/h |
Carrier
Standard shoe size | 610 mm and 610 mm |
Rolling bearings number on either side | 8 and 8 |
Images
Sizes
1. Length with blade | 10410 mm | 1. Length with blade | 9260 mm |
2. Width between caterpillar tracks | 2500 mm | 2. Width between caterpillar tracks | 3160 mm |
3. Height to cab upper part | 4285 mm | 3. Height to cab upper part | 4078 mm |
5. Clearance | 610 mm | 5. Clearance | 615 mm |
Carrier
8. Standard shoe size | 610 mm | 8. Standard shoe size | 610 mm |