vs.

      Hitachi EH1600 vs. Caterpillar 775F

      15 reasons to buy Hitachi EH1600:

      Sizes

      Clearance 890 mm and 791 mm 11 % more or 99 mm
      Unloading ground clearance 810 mm and 625 mm 23 % more or 185 mm

      Operation

      Cooling system fluid volume 268.7 l. and 175 l. 35 % more or 93.7 l.
      Engine oil volume 140 l. and 72 l. 49 % more or 68 l.
      Steering system fluid volume 117 l. and 60 l. 49 % more or 57 l.
      Brake / lift system fluid volume 318 l. and 307 l. 3 % more or 11 l.
      Fuel Capacity 1003 l. and 700 l. 30 % more or 303 l.
      Hydraulic system fluid volume 435 l. and 72 l. 83 % more or 363 l.

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Displacement 30.5 l. and 27 l. 11 % more or 3.5 l.
      Full power 783 kW and 587 kW 25 % more or 196 kW
      Effective power 732 kW and 552 kW 25 % more or 180 kW

      Dump

      Brimmed lifting capacity 35.4 m3 and 32 m3 10 % more or 3.4 m3
      Lifting capacity with top 57.1 m3 and 41.9 m3 27 % more or 15.2 m3
      Lowering time 12.1 sec and 12.5 sec 3 % less or 0.4 sec

      4 reasons to buy Caterpillar 775F:

      Operation

      Differential/final drive fluid volume 155 l. and 140.1 l. 10 % more or 14.9 l.

      Gear box

      Maximum speed 67.5 km/h and 58.6 km/h 13 % more or 8.9 km/h
      Forward gears number 7 and 6 14 % more or 1

      Dump

      Lifting time 9.5 sec and 12.8 sec 26 % less or 3.3 sec

      Neutral reasons:

      Weight

      Loaded rear weight distribution 67 % and 67 %
      Weight without load 70920 kg and 48004 kg
      Laden weight 160664 kg and 109770 kg
      Loaded front weight distribution 33 % and 33 %

      Sizes

      Wheelbase 4570 mm and 4215 mm
      Unloading height 9780 mm and 9261 mm
      Dimensional length 10110 mm and 10334 mm
      Overall width 5890 mm and 5392 mm
      Headroom 5310 mm and 4430 mm

      Operation

      Tyre size 27.00R49 E4 Radial and 24.00R35(E4)

      Motor

      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging
      Cylinders number 12 and 12
      Manufacturer Cummins and Caterpillar
      Model QST 30 and C27 ACERT

      Gear box

      Transmission type Allison DP-8963, planetary type, automatic gear change. Built-in torque converter with automatic lock gear changes in all ranges. and gear type pump
      Reverse gears number 1 and 1

      Dump

      Nominal payload 88904.1 kg and 63502.9 kg
      Discharge angle 62 degrees and 60 degrees

      Images

      Sizes

      5. Clearance 890 mm 5. Clearance 791 mm
      6. Unloading height 9780 mm 6. Unloading height 9261 mm
      7. Unloading ground clearance 810 mm 7. Unloading ground clearance 625 mm
      1. Dimensional length 10110 mm 1. Dimensional length 10334 mm
      2. Overall width 5890 mm 2. Overall width 5392 mm
      3. Headroom 5310 mm 3. Headroom 4430 mm
      4. Wheelbase 4570 mm 4. Wheelbase 4215 mm

      Dump

      8. Discharge angle 62 degrees 8. Discharge angle 60 degrees