vs.

      Iveco AT260T44 (2005) vs. Iveco AT260S27Y/P (2005)

      5 reasons to buy Iveco AT260T44 (2005):

      Wheelbase specifications 2

      Turn radius 9200 mm and 9240 mm 0 % less or 40 mm

      Wheelbase specifications 1

      Turn radius 8725 mm and 8915 mm 2 % less or 190 mm

      Motor

      Effective torque 2200 Nm and 1115 Nm 49 % more or 1085 Nm
      Displacement 12.9 l. and 7.8 l. 40 % more or 5.1 l.
      Full power 353 kW and 200 kW 43 % more or 153 kW

      3 reasons to buy Iveco AT260S27Y/P (2005):

      Wheelbase specifications 3

      Turn radius 9640 mm and 9950 mm 3 % less or 310 mm

      Motor

      Power measured at 2400 rev / min and 1900 rev / min 21 % more or 500 rev
      Torque measured at 1720 rev / min and 1530 rev / min 11 % more or 190 rev

      Neutral reasons:

      Wheelbase specifications 3

      Dimensional length 9150 mm and 9818 mm
      Length from cab rear to frame end 5485 mm and 7413 mm
      Length from rear axle center to frame end 1495 mm and 1410 mm
      Wheelbase 4800 mm and 4800 mm
      Total gross vehicle weight 26000 kg and 26000 kg
      Chassis total weight 8580 kg and 6950 kg

      Wheelbase specifications 2

      Total gross vehicle weight 26000 kg and 26000 kg
      Chassis total weight 8530 kg and 6920 kg
      Wheelbase 4200 mm and 4500 mm
      Dimensional length 8190 mm and 9518 mm
      Length from cab rear to frame end 5525 mm and 7113 mm
      Length from rear axle center to frame end 1135 mm and 1410 mm

      Wheelbase specifications 1

      Wheelbase 3820 mm and 4200 mm
      Dimensional length 8170 mm and 9262 mm
      Length from cab rear to frame end 5505 mm and 6857 mm
      Length from rear axle center to frame end 1495 mm and 1410 mm
      Total gross vehicle weight 26000 kg and 26000 kg
      Chassis total weight 8550 kg and 6900 kg

      Sizes

      Height to cab upper part 3045 mm and 2965 mm
      Rear axles number 2 and 2
      Tyre size 315/80R22.5 and 315/80R22.5
      Class by weight 8 and 8

      Motor

      Manufacturer Iveco and Iveco
      Cylinders number 6 and 6
      Model Cursor 13 (353 cm) and Cursor 8 (200 cm)
      Hole 135 mm and 115 mm
      Strokes 150 mm and 125 mm
      Aspiration turbocharging and turbocharging

      Gear box

      Forward gears number 12 and 12
      Low gear ratio 12.3 :1 and 15.9 :1
      Reverse gears number 2 and 2
      Top gear ratio 0.84 :1 and 1 :1
      Manufacturer ZF and Eurotronic
      Model 16s 181OD and AS2301

      Images

      Sizes

      3. Height to cab upper part 3045 mm 3. Height to cab upper part 2965 mm