vs.

      Iveco AD190S40/P (2005) vs. Iveco AT260T38 (2005)

      6 reasons to buy Iveco AD190S40/P (2005):

      Wheelbase specifications 3

      Turn radius 8915 mm and 9950 mm 10 % less or 1035 mm

      Wheelbase specifications 2

      Turn radius 8615 mm and 9200 mm 6 % less or 585 mm

      Wheelbase specifications 1

      Turn radius 8215 mm and 8725 mm 6 % less or 510 mm

      Motor

      Full power 294 kW and 280 kW 5 % more or 14 kW
      Power measured at 2100 rev / min and 1900 rev / min 10 % more or 200 rev
      Effective torque 1900 Nm and 1800 Nm 5 % more or 100 Nm

      3 reasons to buy Iveco AT260T38 (2005):

      Sizes

      Rear axles number 2 and 1 50 % more or 1

      Motor

      Displacement 12.9 l. and 10.3 l. 20 % more or 2.6 l.

      Gear box

      Forward gears number 16 and 12 25 % more or 4

      Neutral reasons:

      Wheelbase specifications 3

      Wheelbase 5100 mm and 4800 mm
      Dimensional length 8897 mm and 9150 mm
      Length from cab rear to frame end 7072 mm and 5485 mm
      Length from rear axle center to frame end 2387 mm and 1495 mm
      Total gross vehicle weight 19000 kg and 26000 kg
      Chassis total weight 5980 kg and 8580 kg

      Wheelbase specifications 2

      Wheelbase 4800 mm and 4200 mm
      Length from cab rear to frame end 6862 mm and 5525 mm
      Dimensional length 8827 mm and 8190 mm
      Length from rear axle center to frame end 2477 mm and 1135 mm
      Total gross vehicle weight 19000 kg and 26000 kg
      Chassis total weight 5930 kg and 8530 kg

      Wheelbase specifications 1

      Wheelbase 4500 mm and 3820 mm
      Dimensional length 7852 mm and 8170 mm
      Length from cab rear to frame end 5887 mm and 5505 mm
      Length from rear axle center to frame end 1802 mm and 1495 mm
      Total gross vehicle weight 19000 kg and 26000 kg
      Chassis total weight 5880 kg and 8550 kg

      Sizes

      Tyre size 315/80R22.5 and 315/80R22.5
      Class by weight 8 and 8
      Height to cab upper part 2965 mm and 3045 mm

      Motor

      Aspiration turbocharging and turbocharging
      Hole 125 mm and 135 mm
      Strokes 140 mm and 150 mm
      Manufacturer Iveco and Iveco
      Model Cursor 10 (294 cm) and Cursor 13 (280 cm)
      Torque measured at 1480 rev / min and 1480 rev / min
      Cylinders number 6 and 6

      Gear box

      Manufacturer Eurotronic and ZF
      Model AS2301 and 16s 151OD
      Reverse gears number 2 and 2
      Top gear ratio 1 :1 and 0.78 :1
      Low gear ratio 15.9 :1 and 12.3 :1