Construction Machinery. Crawler-Mounted Loader John Deere 655B
Sizes
| Length to front of caterpillar track | 5652 mm |
| Length with bucket on ground level | 5652 mm |
| Width to outside of caterpillar track | 2151 mm |
| Height to cab upper part | 3086 mm |
| Clearance | 356 mm |
| Ground clearance at full height and unloading | 2807 mm |
| Radius at high altitude unloading | 1219 mm |
Operation
| Working weight | 14695 kg |
| Fuel Capacity | 276.3 l. |
| Cooling system fluid volume | 26.5 l. |
| Engine oil volume | 18.9 l. |
| Each final drive fluid volume | 13.2 l. |
| Hydraulic system fluid volume | 140 l. |
| Static tipping load | 8660 kg |
| Breakout force in folded state | 110 kN |
| Brimmed bucket capacity | 1.3 m3 |
| Operating voltage | 24 V |
| Generator current strength | 40 amperes |
| Maximum speed | 10.5 km/h |
Motor
| Manufacturer | John Deere |
| Model | 6068T |
| Effective power | 89.5 kW |
| Displacement | 6.8 l. |
| Power measured at | 2100 rev / min |
| Maximum torque | 508.4 Nm |
| Aspiration | turbocharging |
| Torque measured at | 1300 rev / min |
| Cylinders number | 6 |
Hydraulic system
| Overflow valve pressure | 15514 kPa |
| Lifting time | 5.9 sec |
| Unloading time | 1.3 sec |
| Lowering time | 3.2 sec |
| Type of pump | gear type pump |
| Pump bandwidth | 204 l/min |
Carrier
| Track shoe width | 381 mm |
| Track shoes number per side | 40 |
| Rolling bearings number on either side | 1 |
| Caterpillar track length on ground level | 2306 mm |
| Contact with ground area | 1.8 m2 |
| Specific ground pressure | 82 kPa |
| Track width | 1625 mm |
Images
Sizes
| 1. Length with bucket on ground level | 5652 mm |
| 2. Width to outside of caterpillar track | 2151 mm |
| 3. Height to cab upper part | 3086 mm |
| 5. Clearance | 356 mm |
| 7. Ground clearance at full height and unloading | 2807 mm |
| 8. Radius at high altitude unloading | 1219 mm |
Carrier
| 9. Track width | 1625 mm |