Construction Machinery. Crawler-Mounted Loader John Deere 755C serie II

Sizes

Length to front of caterpillar track 4801 mm
Length with bucket on ground level 6832 mm
Width to outside of caterpillar track 2308 mm
Height to cab upper part 3304 mm
Clearance 426 mm
Ground clearance at full height and unloading 3085 mm
Radius at high altitude unloading 1192 mm

Operation

Working weight 21001.3 kg
Fuel Capacity 319.9 l.
Cooling system fluid volume 57.9 l.
Engine oil volume 22 l.
Each final drive fluid volume 68.1 l.
Hydraulic system fluid volume 174.9 l.
Static tipping load 13795 kg
Breakout force in folded state 164.9 kN
Bucket capacity with top 2.4 m3
Operating voltage 24 V
Generator current strength 55 amperes
Maximum speed 10.9 km/h

Motor

Manufacturer Liebherr
Model D 926 T-EA2
Effective power 132 kW
Displacement 10 l.
Power measured at 1800 rev / min
Maximum torque 919.2 Nm
Aspiration turbocharging
Torque measured at 1000 rev / min
Cylinders number 6

Hydraulic system

Type of pump Variable displacement piston pump with load sensing proportional pump flow control
Pump bandwidth 208.2 l/min
Overflow valve pressure 25993.2 kPa
Lifting time 6.5 sec
Unloading time 2.1 sec
Lowering time 1.5 sec

Carrier

Track shoe width 508 mm
Track shoes number per side 39
Rolling bearings number on either side 6
Caterpillar track length on ground level 2673 mm
Contact with ground area 2.7 m2
Specific ground pressure 75.8 kPa
Track width 1800 mm

Images

Sizes

1. Length with bucket on ground level 6832 mm
2. Width to outside of caterpillar track 2308 mm
3. Height to cab upper part 3304 mm
5. Clearance 426 mm
7. Ground clearance at full height and unloading 3085 mm
8. Radius at high altitude unloading 1192 mm

Carrier

9. Track width 1800 mm