- Home/
- Specifications/
- Tracked Tractor/
- Caterpillar/
- D4C serie III
Construction Machinery. Tracked Tractor Caterpillar D4C serie III
Standard blade
| Width | 2740 mm |
| Height | 928 mm |
| Volume | 1.7 m3 |
| Blade angle in both directions | 25 degrees |
| Cut depth | 448 mm |
Sizes
| Length without blade | 2957 mm |
| Length with blade | 3994 mm |
| Width between caterpillar tracks | 1905 mm |
| Height to cab upper part | 2728 mm |
| Caterpillar track length on ground level | 2055 mm |
| Clearance | 374 mm |
Operation
| Working weight | 7266.1 kg |
| Fuel Capacity | 157 l. |
| Cooling system fluid volume | 21 l. |
| Engine oil volume | 13 l. |
| Hydraulic system fluid volume | 56.8 l. |
| Power unit fluid volume | 28.2 l. |
| Final drive fluid volume | 14.7 l. |
| Operating voltage | 12 V |
| Generator current strength | 55 amperes |
Motor
| Power measured at | 2400 rev / min |
| Displacement | 5 l. |
| Cylinders number | 6 |
| Aspiration | natural aspiration |
| Manufacturer | Caterpillar |
| Model | 3046 |
| Full power | 65.6 kW |
| Effective power | 60.4 kW |
Hydraulic system
| Type of pump | gear type pump |
| Overflow valve pressure | 17236.9 kPa |
| Pump bandwidth | 66.6 l/min |
Gear box
| Transmission type | powershift |
| Forward gears number | 3 |
| Reverse gears number | 3 |
| Maximum forward speed | 11.1 km/h |
| Maximum reverse gear | 11.9 km/h |
Carrier
| Specific ground pressure | 42.7 kPa |
| Contact with ground area | 1.7 m2 |
| Standard shoe size | 406 mm |
| Track shoes number per side | 39 |
| Rolling bearings number on either side | 6 |
| Track width | 1499 mm |
Images
Sizes
| 5. Clearance | 374 mm |
| 6. Length without blade | 2957 mm |
| 1. Length with blade | 3994 mm |
| 2. Width between caterpillar tracks | 1905 mm |
| 3. Height to cab upper part | 2728 mm |
| 4. Caterpillar track length on ground level | 2055 mm |
Carrier
| 7. Track width | 1499 mm |
| 8. Standard shoe size | 406 mm |