Construction Machinery. Tracked Tractor John Deere 950C LGP

Standard blade

Width	4500 mm
Height	1350 mm
Volume	6.3 m3
Blade angle in both directions	25 degrees
Cut depth	600 mm

Sizes

Length without blade	4300 mm
Caterpillar track length on ground level	3275 mm
Length with blade	5770 mm
Clearance	482 mm
Width between caterpillar tracks	2896 mm
Height to cab upper part	3305 mm

Operation

Working weight	24600 kg
Fuel Capacity	450 l.
Cooling system fluid volume	64.4 l.
Engine oil volume	25.5 l.
Hydraulic system fluid volume	178 l.
Power unit fluid volume	178 l.
Final drive fluid volume	14.5 l.
Operating voltage	24 V
Generator current strength	55 amperes

Motor

Torque measured at	1300 rev / min
Aspiration	Turbocharging with intercooler
Cylinders number	6
Manufacturer	Liebherr
Model	D 926 TI
Effective power	171.5 kW
Power measured at	1800 rev / min
Maximum torque	1080.6 Nm
Displacement	10 l.

Hydraulic system

Type of pump	Variable displacement piston pump with load sensing proportional pump flow control
Overflow valve pressure	16000 kPa
Pump bandwidth	292 l/min

Gear box

Transmission type	Electronically controlled closed loop hydrostatic drive with a split power flow
Forward gears number	3
Reverse gears number	3
Maximum forward speed	11 km/h
Maximum reverse gear	11 km/h

Carrier

Specific ground pressure	51 kPa
Contact with ground area	4.7 m2
Standard shoe size	710 mm
Track shoes number per side	43
Rolling bearings number on either side	8
Caterpillar track pitch	215.9 mm
Track width	2180 mm

Images

Sizes

1. Length with blade	5770 mm
2. Width between caterpillar tracks	2896 mm
3. Height to cab upper part	3305 mm
4. Caterpillar track length on ground level	3275 mm
5. Clearance	482 mm
6. Length without blade	4300 mm

Carrier

7. Track width	2180 mm
8. Standard shoe size	710 mm