- Home/
- Specifications/
- Grader/
- Case/
- 845B DHP
Construction Machinery. Grader Case 845B DHP
Steerage
Left and right hinge connection | 25 degrees |
Turn radius | 7.3 m |
Sizes
Between tyres width | 2499 mm |
Wheelbase | 6219 mm |
Blade base | 2562 mm |
Dual axis wheelbase | 1572 mm |
Rear ground clearance | 380 mm |
Front part clearance | 622 mm |
Height to cab upper part | 3340 mm |
Dimensional length | 8534.4 mm |
Operation
Front axle standard operating weight | 4496 kg |
Rear axle standard operating weight | 10109.2 kg |
Overall standard operating weight | 14605.2 kg |
Fuel Capacity | 340.7 l. |
Oil system fluid volume | 70 l. |
Cooling system fluid volume | 39.7 l. |
Hydraulic system fluid volume | 179.8 l. |
Transmission fluid volume | 79.5 l. |
Rear differential/final drive fluid volume | 39.7 l. |
Circular gearbox fluid volume | 2.8 l. |
Each tandem case fluid volume | 60.2 l. |
Tyre size | 14.0 x 24-10 PR |
Operating voltage | 24 V |
Generator current strength | 90 amperes |
Motor
Effective drives torque 7-8 | 759.3 Nm |
Displacement | 6.7 l. |
Aspiration | Turbocharged engine with subsequent cooling of charging air by oncoming air flow |
Manufacturer | Case |
Model | FPT 6.7L |
Power measured at | 2200 rev / min |
Torque measured at | 1500 rev / min |
Cylinders number | 6 |
Effective speeds output 7-8 | 119.3 kW |
Hydraulic system
Type of pump | piston type with load sensing |
Pump flow rate | 185.5 l/min |
Gear box
Transmission type | Powershift transmission with direct drive |
Forward gears number | 8 |
Reverse gears number | 4 |
Maximum forward speed | 42.8 km/h |
Maximum reverse gear | 28.5 km/h |
Front Axle
Wheel tilt | 20 degrees |
General fluctuations | 15.3 degrees |
Dump
Left lateral displacement | 533.4 mm |
Lateral right shift | 685.8 mm |
Lowered blade pressure | 7644.8 kg |
Mouldboard width | 3657.6 mm |
Mouldboard height | 558.8 mm |
Mouldboard thickness | 22 mm |
Maximum cutting depth | 711.2 mm |
Circle
Diameter | 1752.6 mm |
Rotating | 360 degrees |
Maximum lifting above ground level | 444.5 mm |
Images
Sizes
7. Dual axis wheelbase | 1572 mm |
8. Blade base | 2562 mm |
1. Dimensional length | 8534.4 mm |
2. Between tyres width | 2499 mm |
3. Height to cab upper part | 3340 mm |
4. Wheelbase | 6219 mm |
5. Rear ground clearance | 380 mm |
6. Front part clearance | 622 mm |